Wafer level hermetic packaging based on Cu–Sn isothermal solidification technology
Authors:
- Cao YuhanCYCao Yuhan
- Luo LeLLLuo Le
- 1 August 2009
- journal article
- Published by IOP Publishing in Journal of Semiconductors
- Vol. 30 (8) , 168-172
Abstract
A novel wafer level bonding method based on Cu-Sn isothermal solidification technology is established. A multi-layer sealing ring and the bonding processing are designed, and the amount of solder and the bonding parameters are optimized based on both theoretical and experimental results. Verification shows that oxidation of the solder layer, voids and the scalloped-edge appearance of the Cu6Sn5 phase are successfully avoided. An average shear strength of 19.5 MPa and an excellent leak rate of around 1.9 × 10-9 atm cc/s are possible, meeting the demands of MIL-STD-883E.Keywords
This publication has 9 references indexed in Scilit:
- Void Evolution in Sub-100-Micron Sn-Ag Solder Bumps during Multi-reflow and Aging and its Effects on Bonding ReliabilityJournal of Electronic Materials, 2007
- Solid state diffusion in Cu–Sn and Ni–Sn diffusion couples with flip-chip scale dimensionsIntermetallics, 2007
- 3D Chip Stack Technology Using Through-Chip InterconnectsIEEE Design & Test of Computers, 2005
- Strength of joints produced by transient liquid phase bonding in the Cu–Sn systemActa Materialia, 2005
- Kirkendall void formation in eutectic SnPb solder joints on bare Cu and its effect on joint reliabilityJournal of Applied Physics, 2004
- Effects of reactive diffusion on stress evolution in Cu–Sn filmsScripta Materialia, 2004
- Critical interlayer thickness for transient liquid phase bonding in the Cu–Sn systemActa Materialia, 2004
- Selective bonding and encapsulation for wafer-level vacuum packaging of MEMS and related micro systemsMicroelectronics Reliability, 2004
- Solid state intermetallic compound growth between copper and high temperature, tin-rich solders—part I: Experimental analysisJournal of Electronic Materials, 1994