Effect of Ultrafine Iron Ore Addition on Green Bed Properties and Sinter Productivity
Open Access
- 15 June 2025
- journal article
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 65 (7) , 937-947
Abstract
In iron ore sintering, the green bed properties and sinter productivity are influenced by the ore blend mixture including the proportions of ultrafine iron ores in the blend. In this work, iron ore granules, green bed properties and sinter productivity were investigated for blends containing ultrafine iron ores. The granulation and sintering experiments were conducted in a granulation drum with an internal diameter of 500 mm and a length of 310 mm, and a steel pot with an internal diameter of 108 mm and a height of 500 mm, respectively. The results of this study show that the reference blend was representative of a commercial sinter plant mixture in terms of comparable granule size and green bed properties at a similar moisture content of approximately 7%. An increase in the proportion of ultrafine iron ores in the blend resulted in a deterioration of green bed properties. A simple correlation was derived to link green bed voidage (ε) to α, the ratio of granule SMD and dry sinter feed SMD, as ε=0.343exp(1/α). This equation provides a simple yet effective expression that relates green bed voidage to both sinter feed size and granule size, enabling the prediction of bed voidage with a level of accuracy that is comparable to Hinkley's equation. It was concluded that an increase in the proportion of ultrafine iron ores has a negative impact on green bed properties and causes a decrease in the gas flow rate during sintering. Consequently, the productivity of the sinter pot decreased.Keywords
This publication has 32 references indexed in Scilit:
- Evaluation of granule structure and strength properties of green packed beds in iron ore sintering using high-resolution X-ray tomography and uniaxial compression testingParticuology, 2021
- Importance of intensive mixing on sintering with fine-grained iron ore materials: characterization and function mechanismJournal of Materials Research and Technology, 2020
- Prediction of the granule size distribution of iron ore sinter feeds that contain concentrate and micropelletsPowder Technology, 2016
- Current State of Blast-Furnace Smelting in China, Japan, South Korea, Western Europe, and North and South AmericaMetallurgist, 2015
- Improving the Preparation of the Charge Used for Sintering at Ural SteelMetallurgist, 2015
- Pressure drop and liquid holdup in high pressure trickle-bed reactorsChemical Engineering Science, 1994
- An investigation of pre-ignition air flow in ferrous sinteringInternational Journal of Mineral Processing, 1994
- Voidage of ferrous sinter beds: new measurement technique and dependence on feed characteristicsInternational Journal of Mineral Processing, 1994
- Analysis of the Permeability of Granulated Iron Sinter Feeds Using the Ergun EquationMining, Metallurgy & Exploration, 1985
- Some considerations on powder compression equationsPowder Technology, 1971