Production of l-lactic acid by Rhizopus oryzae using semicontinuous fermentation in bioreactor
- 9 September 2010
- journal article
- Published by Oxford University Press (OUP) in Journal of Industrial Microbiology and Biotechnology
- Vol. 38 (4) , 565-571
Abstract
Semicontinuous fermentation using pellets of Rhizopus oryzae has been recognized as a promising technology for l-lactic acid production. In this work, semicontinuous fermentation of R. oryzae AS 3.819 for l-lactic acid production has been developed with high l-lactic acid yield and volumetric productivity. The effects of factors such as inoculations, CaCO3 addition time, and temperature on l-lactic acid yield and R. oryzae morphology were researched in detail. The results showed that optimal fermentation conditions for the first cycle were: inoculation with 4% spore suspension, CaCO3 added to the culture medium at the beginning of culture, and culture temperature of 32–34°C. In orthogonal experiments, high l-lactic acid yield was achieved when the feeding medium was (g/l): glucose, 100; (NH4)2SO4, 2; KH2PO4, 0.1; ZnSO4·7H2O, 0.33; MgSO4·7H2O, 0.15; CaCO3, 50. Twenty cycles of semicontinuous fermentation were carried out in flask culture. l-lactic acid yield was 78.75% for the first cycle and 80–90% for the repeated cycles; the activities of lactate dehydrogenases (LDH) were 7.2–9.2 U/mg; fermentation was completed in 24 h for each repeated cycle. In a 7-l magnetically stirred fermentor, semicontinuous fermentation lasted for 25 cycles using pellets of R. oryzae AS 3.819 under the optimal conditions determined from flask cultures. The final l-lactic acid concentration (LLAC) reached 103.7 g/l, and the volumetric productivity was 2.16 g/(l·h) for the first cycle; in the following 19 repeated cycles, the final LLAC reached 81–95 g/l, and the volumetric productivities were 3.40–3.85 g/(l·h).Keywords
This publication has 14 references indexed in Scilit:
- Orthogonal experiments in the development of carbon-resin for chloride removal from solutionsStatistical Methodology, 2009
- Co-production of lactic acid and chitin using a pelletized filamentous fungusRhizopus oryzaecultured on cull potatoes and glucoseJournal of Applied Microbiology, 2008
- A new approach of pellet formation of a filamentous fungus – Rhizopus oryzaeBioresource Technology, 2007
- Production of lactic acid from renewable materials by Rhizopus fungiBiochemical Engineering Journal, 2007
- Enhanced production of l(+)-lactic acid by floc-form culture of Rhizopus oryzaeJournal of the Chinese Institute of Chemical Engineers, 2007
- Lactate and ethanol productions by Rhizopus oryzae ATCC 9363 and activities of related pyruvate branch point enzymesJournal of Bioscience and Bioengineering, 2006
- Fermentation of lactic acid with Rhizopus arrhizus in a stirred tank reactor with a periodical bleed and feed operationProcess Biochemistry, 2003
- (+)-lactic acid production by pellet-form Rhizopus oryzae R1021 in a stirred tank fermentorChemical Engineering Science, 2003
- Optimization and scale-up of l-lactic acid fermentation by mutant strain Rhizopus sp. MK-96-1196 in airlift bioreactorsJournal of Bioscience and Bioengineering, 2003
- l(+)-lactic acid production by repeated batch culture of Rhizopus oryzae in air-lift bioreactorJournal of Fermentation and Bioengineering, 1998