Texture evolution during hot deformation of Moly-TZM
Authors:
Open Access
- 24 April 2015
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 82 (1) , 012088
Abstract
Moly-TZM was deformed at constant strain rate of 1.0 s-1 to investigate the high strain rate deformation behaviour by microstructural and stress response change within a temperature range of 1400-1700 0 C. To correlate the deformation behaviour with orientational change, recrystallization and recovery of the material, the microstructural investigation was undertaken using scanning electron microscopy (SEM) of electron back scattered diffraction (EBSD). Depending on the grain size and orientation spread recrystallized grains were identified and texture was calculated. Change in grain boundary characteristics with increasing temperature was determined by the misorientation angle distribution for the deformed and recrystallized grains. Subgrain coalescence and increase in subgrain size with increasing temperature was observed, indicating recrystallization not only occurred from the nucleation of the dislocation free grains in grain boundaries but also from the subgrain rotation and merging of the subgrains by annihilation of the low angle grain boundaries. Detailed studies on the evolution of texture of recrystallized grains showed continuous increase in fiber texture in recrystallised grains, in contrast to a mixed fiber + for the deformed grains.Keywords
This publication has 8 references indexed in Scilit:
- Texture evolution during hot deformation of Moly-TZMIOP Conference Series: Materials Science and Engineering, 2015
- Hot deformation behavior of Nb–1Zr–0.1C alloy in the temperature range 700–1700°CJournal of Nuclear Materials, 2012
- High temperature deformation behavior of the molybdenum alloy TZMJournal of Physics: Conference Series, 2010
- The change in the hardness of LCAC, TZM, and ODS molybdenum in the post-irradiated and annealed conditionsJournal of Nuclear Materials, 2009
- A study of hot deformation behavior and microstructural characterization of Mo–TZM alloyJournal of Nuclear Materials, 2009
- Hardening mechanisms and recrystallization behaviour of several molybdenum alloysInternational Journal of Refractory Metals and Hard Materials, 2006
- Effects of strain rate on tensile properties of TZM and Mo–5%ReJournal of Nuclear Materials, 2002
- Microstructure and plasticity of two molybdenum-base alloys (TZM)Materials Science and Engineering: A, 1993