Drilling with exoskeletons: effect of hand-arm vibration on neurological and muscular outcomes
- 30 July 2025
- journal article
- Published by Taylor & Francis in Ergonomics
- Vol. 69 (9) , 1-14
Abstract
Exoskeletons can be used in workplaces where vibrating power tools are applied. The influence of these support systems on vibration exposure and impact remains unclear. In an experimental laboratory study, the influence of two passive exoskeletons for the upper body when working with a drill was compared to a task without exoskeletons. Vibration exposure, transmissibility to the wrist, feed force, muscle activity, muscle fatigue, posture and vibration perception thresholds were measured on 30 subjects. Vibration exposure at the machine handle was higher with both exoskeletons than without an exoskeleton. The vibration perception threshold at 125 Hz shifted less after using the exoskeletons than without using the exoskeletons. When wearing exoskeletons with a strong support torque, increased vibration exposure and higher abduction of the upper arm may occur. The results indicate that exoskeletons reduce the transmission of vibrations in the lower frequency range.Keywords
Funding Information
- Deutsche Gesetzliche Unfallversicherung
This publication has 30 references indexed in Scilit:
- Side-effects and adverse events of a shoulder- and back-support exoskeleton in workers: A systematic reviewApplied Ergonomics, 2023
- Industrial exoskeletons for overhead work: Circumferential pressures on the upper arm caused by the physical human-machine-interfaceApplied Ergonomics, 2022
- Benchmarking occupational exoskeletons: An evidence mapping systematic reviewApplied Ergonomics, 2022
- The influence of using exoskeletons during occupational tasks on acute physical stress and strain compared to no exoskeleton – A systematic review and meta-analysisApplied Ergonomics, 2021
- The effects of feed force on rivet bucking bar vibrationsInternational Journal of Industrial Ergonomics, 2018
- Vibrations transmitted from human hands to upper arm, shoulder, back, neck, and headInternational Journal of Industrial Ergonomics, 2017
- Filtering the surface EMG signal: Movement artifact and baseline noise contaminationJournal of Biomechanics, 2010
- Temporary threshold shifts (TTS) of fingertip vibrotactile perception thresholds from hand-held tool vibration exposures at working surfaceInternational Journal of Industrial Ergonomics, 2008
- Influence of hand–arm posture on biodynamic response of the human hand–arm exposed to zh-axis vibrationInternational Journal of Industrial Ergonomics, 2006
- Exposure-response relationship in the hand-arm vibration syndrome: an overview of current epidemiology researchInternational Archives of Occupational and Environmental Health, 1998