Thermoelastohydrodynamic characteristics of supercritical CO2 spiral groove face seals
Authors:
- 11 September 2020
- journal article
- research article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 73 (1) , 153-162
Abstract
Purpose: The purpose of this study is to determine the sealing performance of face seals by numerical analysis of thermoelastohydrodynamic characteristics of supercritical CO2 (S-CO2) spiral groove face seals in the supercritical regime. Design/methodology/approach: The spiral groove face seal was used as the research object. The distribution of lubricating film pressure and temperature was analysed by solving the gas state, Reynolds and energy equations using the finite difference method. Furthermore, the influence law of sealing performance was obtained. Findings: Close to the critical temperature of S-CO2, face distortions produced by increasing pressure lead to divergent clearance and resulted in reduced opening force. In the state of S-CO2, the face distortions generated by increasing seal temperature lead to convergent clearance, which enhances the opening force. In addition, near the critical temperature of S-CO2, the opening force may be reduced by 10%, and the leakage rate of the seal sharply increases by a factor of four. Originality/value: The thermoelastohydrodynamic characteristics of supercritical CO2 face seals are illustrated considering the actual gas effect including compressibility, heat capacity and viscosity. Face distortions and sealing performance were calculated under different seal pressures and seal temperatures in the supercritical regime, as well as with N2 for comparison. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2020-0169/Keywords
This publication has 17 references indexed in Scilit:
- The influence of real gas effects on the performance of supercritical CO 2 dry gas sealsTribology International, 2016
- Thermoelastohydrodynamic Gas Lubrication of Spiral-Groove Face Seals: Modeling and Analysis of Vapor CondensationTribology Transactions, 2016
- A Mixed Thermoelastohydrodynamic Lubrication Analysis of Mechanical Face Seals by a Multiscale ApproachTribology Transactions, 2015
- An analytical approach to heat transfer and thermal distortions in non-contacting face sealsInternational Journal of Heat and Mass Transfer, 2015
- Parametric analysis of heat transfer in non-contacting face sealsInternational Journal of Heat and Mass Transfer, 2013
- The Parameters Influencing High-Pressure Mechanical Gas Face Seal Behavior in Static OperationTribology Transactions, 2009
- Thermoelastohydrodynamic Behavior of Mechanical Gas Face Seals Operating at High PressureJournal of Tribology, 2007
- Sealing in TurbomachineryJournal of Propulsion and Power, 2006
- Numerical Modelling of High Pressure Gas Face SealsJournal of Tribology, 2005
- A New Equation of State for Carbon Dioxide Covering the Fluid Region from the Triple-Point Temperature to 1100 K at Pressures up to 800 MPaJournal of Physical and Chemical Reference Data, 1996