Slowing down the corrosion of metal structures using polymeric materials
Open Access
- 2 June 2021
- conference paper
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 264, 02055
Abstract
This article examines the resistance of corrosion-resistant polymeric materials to chemical reagents and the degree of corrosion, taking into account the direction of corrosion processes. One of the main factors that determined the corrosion rate is air humidity and dust released into the atmosphere during industrial emissions. Mixtures based on polymer materials can be used to gum up chemical apparatus and equipment; for corrosion protection, expensive materials are required. The sample is conditioned for 30 months at (23 ± 2) 0С, relative humidity (50 ± 5) %, and the thickness of the sample is determined. Resistance to chemical reagents the change in mass of samples of polymeric materials at a temperature of 35 0C for 3 months was analyzed. It was also found that by determining the corrosion rate (grade St3) by storing steel plates in a different exposure environment for 50 days. As a result, the corrosion rate of steel anti-corrosion coatings is lower than the control sample. According to the data obtained, it was found that the chloro-sulfonated polyethylene compositions are resistant to various organic solvents, acids, alkalis, oxidizing agents, and others.Keywords
This publication has 11 references indexed in Scilit:
- Steel-Reinforced Concrete Structures2017
- Materials for Architects and Builders2014
- European Building Construction Illustrated2014
- Focused section on optomechatronicsIEEE/ASME Transactions on Mechatronics, 2009
- Laboratory observation of dew formation at an early stage of atmospheric corrosion of metalsCorrosion Science, 2002
- Laboratory simulation of atmospheric corrosion by SO2—II. Electrochemical mass loss comparisonsCorrosion Science, 1991
- Laboratory simulation of atmospheric corrosion by SO2—I. Apparatus, electrochemical techniques, example resultsCorrosion Science, 1991
- A Thermodynamic Perspective of Copper Tarnishing in Moist Air—SO2Corrosion, 1990
- Corrosion of structural steelwork in bridge enclosures, box sections, and anchorage chambersBritish Corrosion Journal, 1987
- The velocity of corrosion from the electrochemical standpoint. Part IIProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1932