Numerical Investigation of Engine Performance and Emission Characteristics of an Ammonia/Hydrogen/n-Heptane Engine Under RCCI Operating Conditions
Authors:
Open Access
- 5 July 2023
- journal article
- research article
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 112 (3) , 957-974
Abstract
This paper examines the potential of using ammonia (NH $$_3$$ ) as a primary fuel in heavy-duty engines for decarbonization, with some challenges yet to be addressed. It presents a numerical study of a Reactivity Controlled Compression Ignition engine, where pilot diesel is used to ignite the premixed ammonia/air mixture. The numerical model and combustion mechanism are validated against engine experimental results using methanol and iso-octane fuels and ignition delay times of ammonia/n-heptane mixtures measured in a rapid compression machine. The findings show that the engine can effectively operate with up to 50% of the total energy supplied by premixed ammonia, albeit with slightly elevated NO emissions compared to a diesel-fueled engine. Increasing ammonia further leads to lower combustion efficiency. Hydrogen can be utilized in the ammonia engine to enhance ammonia combustion; however, NO emissions increase further. Ammonia leakage primarily originates from regions near the cold wall, the center of the cylinder, and the crevice. N $$_2$$ O mainly forms at the ammonia flame front. Emission of N $$_2$$ O is therefore mainly due to flame front quenching near the wall.
Keywords
Funding Information
- Nordic Energy Research (CAHEMA, CAHEMA)
- Lund University
This publication has 26 references indexed in Scilit:
- The Relevance of Different Fuel Indices to Describe Autoignition Behaviour of Gasoline in Light Duty DICI Engine under PPC ModeSAE International Journal of Advances and Current Practices in Mobility, 2019
- Ammonia for powerProgress in Energy and Combustion Science, 2018
- Experimental and modeling study of liquid fuel injection and combustion in diesel engines with a common rail injection systemApplied Energy, 2018
- Comparison of Gasoline and Primary Reference Fuel in the Transition from HCCI to PPCSAE International Journal of Advances and Current Practices in Mobility, 2017
- Ammonia-Hydrogen Blends in Homogeneous-Charge Compression-Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 2017
- Analysis of the effects of wall temperature swing on reciprocating internal combustion engine processesInternational Journal of Engine Research, 2017
- Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion enginesProgress in Energy and Combustion Science, 2015
- Effects of gaseous ammonia direct injection on performance characteristics of a spark-ignition engineApplied Energy, 2014
- Combustion and emissions characteristics of compression-ignition engine using dual ammonia-diesel fuelFuel, 2011
- Automatic Mesh Motion with Topological Changes for Engine SimulationSAE International Journal of Advances and Current Practices in Mobility, 2007