Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All‐Solid‐State Lithium–Sulfur Batteries
Open Access
- 23 April 2024
- journal article
- research article
- Published by Wiley in Advanced Science
- Vol. 11 (25) , e2308604
Abstract
As a very prospective solid‐state electrolyte, Li10GeP2S12 (LGPS) exhibits high ionic conductivity comparable to liquid electrolytes. However, severe self‐decomposition and Li dendrite propagation of LGPS will be triggered due to the thermodynamic incompatibility with Li metal anode. Herein, by adopting a facile chemical vapor deposition method, an artificial solid electrolyte interphase composed of Li2S is proposed as a single ionic conductor to promote the interface stability of LGPS toward Li. The good electronic insulation coupled with ionic conduction property of Li2S effectively blocks electron transfer from Li to LGPS while enabling smooth passage of Li ions. Meanwhile, the generated Li2S layer remains good interface compatibility with LGPS, which is verified by the stable Li‐plating/stripping operation for over 500 h at 0.15 mA cm−2. Consequently, the all‐solid‐state Li–S batteries (ASSLSBs) with a Li2S layer demonstrate superb capacity retention of 90.8% at 0.2 mA cm−2 after 100 cycles. Even at the harsh condition of 90 °C, the cell can deliver a high reversible capacity of 1318.8 mAh g−1 with decent capacity retention of 88.6% after 100 cycles. This approach offers a new insight for interface modification between LGPS and Li and the realization of ASSLSBs with stable cycle life.Keywords
Funding Information
- National Key Research and Development Program of China (2021YFB3800300)
- National Natural Science Foundation of China (22179059, 22239002)
This publication has 38 references indexed in Scilit:
- Understanding Electrochemical Reaction Mechanisms of Sulfur in All‐Solid‐State Batteries through Operando and Theoretical Studies **Angewandte Chemie International Edition, 2023
- A Facile Way to Construct Stable and Ionic Conductive Lithium Sulfide Nanoparticles Composed Solid Electrolyte Interphase on Li Metal AnodeAdvanced Functional Materials, 2020
- 2H‐MoS2 as an Artificial Solid Electrolyte Interface in All‐Solid‐State Lithium–Sulfur BatteriesAdvanced Materials Interfaces, 2020
- Developing A “Polysulfide‐Phobic” Strategy to Restrain Shuttle Effect in Lithium–Sulfur BatteriesAngewandte Chemie International Edition, 2019
- Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal AnodeAdvanced Energy Materials, 2019
- Assembling All‐Solid‐State Lithium–Sulfur Batteries with Li3N‐Protected AnodesChempluschem, 2019
- Revisiting the Role of Polysulfides in Lithium–Sulfur BatteriesAdvanced Materials, 2018
- Towards High‐Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface EnergyAdvanced Science, 2016
- Electrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid ElectrolytesAdvanced Energy Materials, 2016
- The Hydrothermal Effect on Crystal Development and Electrical Conductivity of Li2CO3Crystal Research and Technology, 1993