Modulation in polymer properties in PVDF/BCZT composites with ceramic content and their energy density capabilities
Authors:
- 15 September 2020
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 41 (12) , 5305-5316
Abstract
The lead‐free 0.5((Ba0.7Ca0.3)TiO3)‐0.5(Ba(Zr0.2Ti0.8))O3(BCZT) piezoceramics were synthesized using sol‐gel method. The Rietveld analysis of X‐ray diffraction (XRD) data and differential scanning calorimetry (DSC) studies of as‐synthesized BCZT powder suggests the co‐existence of ferroelectric orthorhombic (O) and tetragonal (T) phases at room temperature (RT). The value of curie temperature (TT‐C) as depicted from DSC and dielectric studies was found to be ≈ 110°C. The BCZT ceramic particles were dispersed in the polyvinylidene fluoride (PVDF) matrix, an electroactive polymer with great ferro/piezoelectric response in its distinct β and γ phases, to form ferroelectric ceramic‐polymer composites for their applications in flexible energy storage capacitors. The present work reports the Fourier‐transform infrared spectroscopy (FTIR), XRD, dielectric, ferroelectric, and energy density properties of PVDF/BCZT composite films having different wt% of BCZT content fabricated by the solution‐cast technique. The FTIR and XRD studies depict the γ‐PVDF and pure BCZT phases in composite films. The dielectric studies estimated the relative permittivity (εr) of a composite film with 50 wt% of BCZT content to be ≈ 31 (at 120 Hz) which was about three times as compared with that of pure PVDF. The dielectric loss (tan δ) was maximum ≈ 0.15 (at 120 Hz) for 50 wt% BCZT composition. The ferroelectric studies and energy storage calculations showed that the value of remnant polarization (Pr), coercive field (Ec) and energy storage density (W) attain the maximum value of 0.63 μC/cm2, 21.20 kV/cm, and 70.46 mJ/cm3, respectively for the film sample having 40 wt% BCZT content. The maximum energy storage efficiency, η (%) is calculated to be ≈ 60 for 50 wt% BCZT composition. The results indicated that the incorporation of BCZT particles in the PVDF matrix improved the overall polarization (polar and interfacial) which enhance the electric properties of composite films. The ferroelectric studies with temperature revealed the PVDF/BCZT composition‐dependent polymer or ceramic dominance in the behavior of composite films. With the maximum value of relative permittivity (εr) and energy storage efficiency (η), the PVDF/BCZT composition with 50 wt% of BCZT content has been optimized for applications in flexible energy storage capacitors.Keywords
This publication has 63 references indexed in Scilit:
- Electroactive phases of poly(vinylidene fluoride): Determination, processing and applicationsProgress in Polymer Science, 2014
- Crystallography Open Database – an open-access collection of crystal structuresJournal of Applied Crystallography, 2009
- Stress- and temperature-dependent scaling behavior of dynamic hysteresis in soft PZT bulk ceramicsPhysica Scripta, 2007
- Novel high‐dielectric‐permittivity poly(vinylidene fluoride)/polypropylene blend composites: The influence of the poly(vinylidene fluoride) concentration and compatibilizerJournal of Applied Polymer Science, 2007
- R factors in Rietveld analysis: How good is good enough?Powder Diffraction, 2006
- Dielectric mixtures: electrical properties and modelingIEEE Transactions on Dielectrics and Electrical Insulation, 2002
- X-Ray Diffraction Determination of Stresses in Thin FilmsMRS Proceedings, 1988
- Strains induced upon drying thin films solvent‐cast on flexible substratesJournal of Polymer Science: Polymer Physics Edition, 1976
- Dielectric and X-Ray Studies of andPhysical Review B, 1961
- Neutron Diffraction Study of Orthorhombic BaTiPhysical Review B, 1957