Effect of Different Environmental Dielectrics on the Pulse-Forming Characteristics of Solid-State Meander Pulse-Forming Line
Authors:
- 6 April 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 44 (5) , 821-828
Abstract
Compact, portable pulsed power technology is rapidly developed. Solid-state storage medium attracts strong interest, since it has been characterized a high power storage density and good environmental adaptability. In this paper, we use a glass-ceramic substrate, with the dimension of 250 mm×95 mm× 4 mm, to deliver a high-voltage pulse with a pulse duration longer than 120 ns. In tests, both the pulse duration and the impedance are varying when we are changing the environmental dielectric from the transformer oil or air to the propylene carbonate. A theoretical model is used to analyze the phenomena and verified by the CST simulation. The dispersion analysis shows that a good dispersion characteristic is obtained in the work band of the forming pulse, although the environmental dielectric will influence the pulse duration and characteristic impedance.Keywords
Funding Information
- National Science Foundation of China (51477177, 51477012)
This publication has 48 references indexed in Scilit:
- Two Ways to Increase the Pulse Duration of the Solid Pulse-Forming Line Based on Dispersion AnalysisIEEE Transactions on Plasma Science, 2015
- A compact 100 kV high voltage glycol capacitorReview of Scientific Instruments, 2015
- An 8-GW long-pulse generator based on Tesla transformer and pulse forming networkReview of Scientific Instruments, 2014
- A compact bipolar pulse-forming network-Marx generator based on pulse transformersReview of Scientific Instruments, 2013
- Breakdown characteristics of niobate glass-ceramic under pulsed conditionIEEE Transactions on Dielectrics and Electrical Insulation, 2013
- Submicrosecond Pulsed Power Capacitors Based on Novel Ceramic TechnologiesIEEE Transactions on Plasma Science, 2010
- A selectively metallized, microfabricated W-band meander line TWT circuit2008
- Critical component requirements for compact pulse power system architecturesIEEE Transactions on Plasma Science, 2005
- New opportunities in vacuum electronics through the application of microfabrication technologies2003
- A transportable 500 kV, high average power modulator with pulse length adjustable from 100 ns to 500 ns2002