A 78 dB 0.417 mW Second-Order NS SAR ADC with Dynamic Amplifier-Assisted Integrator
Open Access
- 16 January 2024
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 13 (2) , 371
Abstract
The noise-shaping (NS) successive approximation register (SAR) analog-to-digital converter (ADC) is an innovative hybrid structure that offers performance advantages. The NS-SAR ADC leverages the SAR ADC as its foundation and combines oversampling technology and noise-shaping technology found in Sigma-Delta ADC. This integration effectively combines the strengths of both structures and enhances overall performance. The ADC features a simple circuit structure, compact chip area, and high energy efficiency, which has positioned it as a prominent research area. In this paper, leveraging the TSMC 65 nm GP process, the NS-SAR ADC is designed with a power supply voltage of 1 V. This design adopts an 8-bit differential capacitor structure, operates at a sampling frequency of 16 MS/s, and achieves an oversampling rate of 16 times the desired performance indicators. Through extensive circuit post simulation verification, the SNR obtained reaches 78 dB, providing an effective bit resolution of 12.7 bits. The core chip area of the ADC measures 366 × 333 μm2, while the power consumption is impressively low at 417 μW and FoMs is 168 dB.Keywords
Funding Information
- Beijing Municipal Science and Technology Project (Z221100007722028)
This publication has 14 references indexed in Scilit:
- A 2nd-Order Noise-Shaping SAR ADC With Lossless Dynamic Amplifier Assisted IntegratorIEEE Transactions on Circuits and Systems II: Express Briefs, 2019
- A Second-Order Noise-Shaping SAR ADC With Passive Integrator and Tri-Level VotingIEEE Journal of Solid-State Circuits, 2019
- 20.3 A 50MHz-Bandwidth 70.4dB-SNDR Calibration-Free Time-Interleaved 4th-Order Noise-Shaping SAR ADC2019
- A 13-ENOB Second-Order Noise-Shaping SAR ADC Realizing Optimized NTF Zeros Using the Error-Feedback StructureIEEE Journal of Solid-State Circuits, 2018
- 160 MS/s 20 MHz bandwidth third‐order noise shaping SAR ADCElectronics Letters, 2018
- Passive Noise Shaping in SAR ADC With Improved EfficiencyIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2017
- 28.1 A 0.46mW 5MHz-BW 79.7dB-SNDR noise-shaping SAR ADC with dynamic-amplifier-based FIR-IIR filter2017
- A 2nd order fully-passive noise-shaping SAR ADC with embedded passive gain2017
- A 12b-ENOB 61µW noise-shaping SAR ADC with a passive integrator2016
- A 90-MS/s 11-MHz-Bandwidth 62-dB SNDR Noise-Shaping SAR ADCIEEE Journal of Solid-State Circuits, 2012