A novel inherently hydrophobic and physicomechanically robust coconut oil-based polyurethane-modified mortar
Open Access
- 19 November 2025
- journal article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 40664
Abstract
Water penetration in mortar structures has long been a significant challenge in the construction industry, resulting in metal bar corrosion, structural deterioration, reduced durability, and increased maintenance costs. Hence, enhancing water resistance is crucial. While surface coatings are common solutions, they are often costly and require frequent maintenance. To address this concern, this study presents a novel coconut oil (CO)-based polyurethane (PU)-modified mortar, leveraging the intrinsic hydrophobic properties of CO owing to its saturated fatty acid structure. Different concentrations of COPU (0-7 wt.%) were investigated to determine the optimal formulation. The characterization results indicated enhanced hydrophobicity, with a water contact angle of 125° achieved at the 2 wt.% COPU addition to the PMM mixture, compared to 110° of the control sample. Additionally, the water absorption test demonstrated a significant 54 wt.% reduction compared with that of pristine mortar, attributed to the gap-filling and binding actions of the COPU matrix with ettringites, as evidenced by SEM analysis. This modification also resulted in a 40 wt.%, being the highest improvement in compressive strength (from 13.1 to 18.4 MPa at 2 wt.% COPU) and a slight reduction in density. Additionally, the prepared samples were evaluated using thermogravimetric analysis, X-ray diffraction, and X-ray fluorescence analyses. The findings in this work advance the field by presenting eco-friendly COPU-modified materials that improve water resistance and durability in mortar, promoting sustainable practices.Keywords
Funding Information
- Department of Science and Technology, Republic of the Philippines
This publication has 64 references indexed in Scilit:
- Durability of the hydrophobic treatment on brick and mortarBuilding and Environment, 2021
- An experimental investigation on the impermeability and durability of concrete with a novel and multifunctional hydrophobic admixture additionStructural Concrete, 2021
- Polyols and polyurethanes from renewable sources: past, present and future—part 1: vegetable oils and lignocellulosic biomassJournal of Coatings Technology and Research, 2021
- Monitoring of Portland cement chemical reaction and quantification of the hydrated products by XRD and TG in function of the stoppage hydration techniqueJournal of Thermal Analysis and Calorimetry, 2018
- Steel Corrosion in Reinforced Concrete2018
- Assessment of early age properties of cementitious system through isopropanol–water replacement in the mixing waterCement and Concrete Research, 2016
- TG–DTG–DTA in studying white self-compacting cement mortarsJournal of Thermal Analysis and Calorimetry, 2012
- Comparison of methods for arresting hydration of cementCement and Concrete Research, 2011
- Thermal analysis and microstructure of Portland cement-fly ash-silica fume pastesJournal of Thermal Analysis and Calorimetry, 2009
- Hydration mechanisms of super sulphated slag cementCement and Concrete Research, 2008