Sensitization of Powder Metallurgy Type 430L Stainless Steel Sintered in Nitrogen-Hydrogen Atmosphere
- 1 January 2008
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 64 (1) , 70-82
Abstract
The degree of sensitization of ferritic AISI 430L (UNS S43000) stainless steel, prepared by powder metallurgy (PM), was examined by exposure methods (ASTM A763-93, Practice W and Practice Z) and electrochemical reactivation methods such as electrochemical potentiokinetic reactivation (EPR) and electrochemical potentiokinetic reactivation double-loop (EPRDL) tests. Two sintering atmospheres, vacuum and nitrogen-hydrogen, were chosen. The latter was the focus of the work and the former was used for comparison. It was seen that nitrogen played an important role in the degree of sensitization, either when dissolved or in intermetallic precipitates. Because heat treatment was necessary to control the microstructural features, a set of heat treatments was established: annealing and aging at 100, 200, 300, 375, 675, and 875°C for different times (90 min and 4, 6, 8, and 48 h). The effect of nitrogen and temperature-time aging on corrosion resistance was investigated. Experimental results showed that there was an optimal aging heat treatment for nitrogen-sintered stainless steel in comparison to vacuum-sintered samples. Furthermore, the results indicated that the electrochemical reactivation methods used for PM ferritic stainless steels were suitable to evaluate the degree of sensitization. Effects of the heat treatments were discussed as the consequence of two competing mechanisms: dissolution and phase precipitation of nitrogen.Keywords
This publication has 24 references indexed in Scilit:
- Electrochemical reactivation methods applied to PM austenitic stainless steels sintered in nitrogen–hydrogen atmosphereCorrosion Science, 2008
- Pitting corrosion behaviour of PM austenitic stainless steels sintered in nitrogen–hydrogen atmosphereCorrosion Science, 2007
- Effect of high temperature annealing on texture and microstructure on an AISI-444 ferritic stainless steelMaterials Characterization, 2006
- Effect of silicon content and aging time on density, hardness, toughness and corrosion resistance of sintered 303LSC–Si stainless steelsMaterials Science and Engineering: A, 2006
- Microstructural, mechanical, and corrosion characterization of nitrogen-implanted plastic injection mould steelSurface and Coatings Technology, 2005
- Effect of “475 °C embrittlement” on duplex stainless steels localized corrosion resistanceCorrosion Science, 2005
- Precipitation of carbides and sigma phase in AISI type 446 stainless steel under working conditionsJournal of Materials Processing Technology, 2004
- Overview: high-nitrogen alloying of stainless steelsMaterials Science and Engineering: A, 1996
- Embrittlement and aging at 475 °C in an experimental ferritic stainless steel containing 38 wt.% chromiumMaterials Science and Engineering: A, 1995
- Corrosion behaviour of P/M duplex stainless steels made from prealloyed and mixed powdersJournal of Materials Processing Technology, 1995