Transition metal cleaning using thermal beams
Authors:
- 1 November 1997
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 15 (6) , 2959-2967
Abstract
The cleaning of transition metals including copper, nickel and iron from silicon surfaces at ambient temperature was demonstrated using various thermal beams. Sputter-deposited copper was found in two forms on silicon surfaces: uniformly dispersed copper and copper islands. At room temperature, a ClF3 beam removed the uniformly dispersed copper, but not the copper islands. Since copper–halides are not volatile at room temperature, the observation of uniformly dispersed copper removal suggested the formation of a volatile silicon–copper–halogen species. To remove the copper islands, a hot thermal dichlorosilane SiCl2H2 (DCS) beam which pyrolytically produces SiCl2 was used as a reactive silicon source. The DCS beam alone deposited SiClx on wafer surfaces suppressing complete copper removal. Exposure of this surface to ClF3 removed the SiClx deposition and copper islands from the wafer surface at room temperature. Beams containing DCS+Cl2 or DCS+F2 in which the F2 or Cl2 was also pyrolytically dissociated at 1000 °C to form F and Cl atoms, were tested. The combination of DCS with Cl2 at a beam temperature of 1000 °C reduced the deposition rate, but did not remove all of the copper islands from the wafer surface. A F2 beam at 1000 °C alone did not remove the SiClx deposition as ClF3 did; however, the mixed DCS+F2 beam at 1000 °C removed copper to below the detection limit of x-ray photoelectron spectroscopy without any observable deposition. These results validated the proposed copper removal mechanism in which a volatile copper–halogen–silicon compound was formed. The mixed DCS+F2 beam was also capable of removing other transition metals such as nickel and iron at room temperature.Keywords
This publication has 26 references indexed in Scilit:
- The structure and thermal behavior of Cu on ultrathin films of SiO2 on Si(111)Surface Science, 1997
- Growth and in-depth distribution of thin metal films on silicon (111) studied by XPS: inelastic peak shape analysisSurface Science, 1995
- Reaction probability and reaction mechanism in silicon etching with a hot Cl2 molecular beamJournal of Applied Physics, 1995
- Silicon wafer cleaning with CF4/H2 plasma and its effect on the properties of dry thermally grown oxideSolid-State Electronics, 1992
- Anisotropic and damageless etching of single-crystalline silicon using chlorine trifluoride molecular beamJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1992
- Plasmaless etching of silicon using chlorine trifluorideJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1991
- Wafer Cleaning with Photoexcited Chlorine and Thermal Treatment for High-Quality Silicon EpitaxyJapanese Journal of Applied Physics, 1989
- Si Etching with a Hot SF6 Beam and the Etching MechanismJapanese Journal of Applied Physics, 1987
- 7 × 7 Si(111)Cu interfaces: Combined LEED, AES and EELS measurementsSurface Science, 1985
- Plasmaless dry etching of silicon with fluorine-containing compoundsJournal of Applied Physics, 1984