Study of Frequency Controlled Drive of Locomotive Power Plant Cooling Fan
Authors:
- 1 May 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
One of the options for calculating the frequency-controlled asynchronous drive of the locomotive power plant cooling fan is considered. The block diagram of the auxiliary frequency converter, as well as the calculation results of the drive for the 2TE25A diesel locomotive are presented. The obtained characteristics of a frequency-controlled asynchronous drive at the same supply frequency α and the same absolute slip β and decrease in the phase voltage U1 by half allow us to conclude that the current also decreases by half, the electromagnetic moment decreases four times for the same absolute slip of the rotor β within the working area of its mechanical characteristics. In this case, the critical slip of the investigated drive will remain constant. In case of constant voltage U1, the greater is the value of the electromagnetic moment, the lower is the relative frequency α for any absolute slip β. Accordingly, the change in the magnitude of the drive supply voltage U1 affects the efficiency of its mechanical characteristics.Keywords
This publication has 14 references indexed in Scilit:
- Study of the asynchronous traction drive's operating modes by computer simulation. Part 2: simulation results and analysisTransport Problems, 2017
- Electric Motors in Electrified Transportation: A step toward achieving a sustainable and highly efficient transportation systemIEEE Power Electronics Magazine, 2014
- Reliability evaluating for traction drive system of high-speed electrical multiple units2013
- A new cooling approach for traction motors in hybrid drives2013
- Characterization and application of forced cooling channels for traction motors in HEVs2012
- A combined electromagnetic and thermal analysis of induction motorsIEEE Transactions on Magnetics, 2005
- Design optimization of switched reluctance motor by electromagnetic and thermal finite element analysis2004
- Design assessment and implementation potential of three-phase asynchronous AC traction motor systems for North America2002
- Experimental study of the cooling of a closed type electric motorApplied Thermal Engineering, 2000
- Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motorsIEEE Transactions on Industry Applications, 1992