Numerical Investigation of Heat/Flow Transfer and Thermal Stress in an Anode-Supported Planar SOFC
Open Access
Abstract
To elucidate the thermofluid reacting environment and thermal stress inside a solid oxide fuel cell (SOFC), a three-dimensional SOFC model is implemented by using the finite element method in the commercial software COMSOL Multiphysics®, which contains both a geometric model of the full-cell structure and a mathematical model. The mathematical model describes heat and mass transfer, electrochemical reactions, internal reforming reactions, and mechanical behaviors that occur within the cell. A parameter study is performed focusing on the inlet fuel composition, where humidified hydrogen and methane syngas (the steam-to-carbon ratio is 3) as well as the local distribution of temperature, velocity, gas concentrations, and thermal stress are predicted and presented. The simulated results show that the fuel inlet composition has a significant effect on the temperature and gas concentration distributions. The high-temperature zone of the hydrogen-fueled SOFC is located at the central part of units 5, 6, and 7, and the maximum value is about 44 K higher than that of methane syngas-fueled SOFC. The methane-reforming and electrochemical reactions in the anode active layer result in a significant concentration gradient between the anode support layer and the active layer of the methane syngas-fueled SOFC. It is also found that the thermal stress distributions of different fuel inlet compositions are rather different. The maximum stress variation gradient between electrode layers of hydrogen SOFC is larger (44.2 MPa) than that of methanol syngas SOFC (14.1 MPa), but the remaining components have a more uniform stress distribution. In addition, the electrode layer of each fuel SOFC produces a significant stress gradient in the y-axis direction, and stress extremes appear in the corner regions where adjacent assembly components are in contact.Keywords
Funding Information
- National Natural Science Foundation of China (51979121, 52171308, 2020J02041, 2021J01846, 2021H0021, 2022J01807, 3502Z20226011)
- Natural Science Foundation of Fujian Province (51979121, 52171308, 2020J02041, 2021J01846, 2021H0021, 2022J01807, 3502Z20226011)
- Xiamen Municipal Bureau of Sciences & Technology (51979121, 52171308, 2020J02041, 2021J01846, 2021H0021, 2022J01807, 3502Z20226011)
This publication has 29 references indexed in Scilit:
- Isolating the impact of CO concentration in syngas mixtures on SOFC performance via internal reforming and direct oxidationInternational Journal of Hydrogen Energy, 2016
- The effect of fuel utilization on heat and mass transfer within solid oxide fuel cells examined by three-dimensional numerical simulationsInternational Journal of Heat and Mass Transfer, 2016
- Three-dimensional CFD modeling of transport phenomena in multi-channel anode-supported planar SOFCsInternational Journal of Heat and Mass Transfer, 2015
- Direct methane fueled solid oxide fuel cell model with detailed reforming reactionsChemical Engineering Journal, 2013
- Finite element and analytical stress analysis of a solid oxide fuel cellJournal of Power Sources, 2012
- Effects of Nb and W additions on high-temperature creep properties of ferritic stainless steels for solid oxide fuel cell interconnectJournal of Power Sources, 2012
- Thermal stresses in an operating micro-tubular solid oxide fuel cellJournal of Power Sources, 2010
- Thermal stress and thermo-electrochemical analysis of a planar anode-supported solid oxide fuel cell: Effects of anode porosityJournal of Power Sources, 2010
- Elastic and thermal expansion behavior of two-phase compositesMaterials Science and Engineering: A, 2006
- Three-dimensional simulation of chemically reacting gas flows in the porous support structure of an integrated-planar solid oxide fuel cellInternational Journal of Heat and Mass Transfer, 2004