Effect of Core Materials on the Formation of Hollow Alumina Microspheres by Mechanofusion Process

Authors:

Abstract
Core/shell structures have been prepared via a mechanofusion system by employing several kinds of spherical polymers as a core material and Al 2 O 3 powder or a mixture of Al 2 O 3 and SiO 2 powders as a shell material. The effect of the kind of core polymers on the quality of the resulting hollow alumina microspheres has been discussed on the basis of the thermal decomposition behavior of spherical polymers used as a core material. A large fraction of hollow alumina microspheres reflecting the shape and the particle size distribution of the core polymer could be fabricated after sintering at 1600°3C for 3 h, when highly cross‐linked poly(methyl methacrylate) (PMMA) microspheres with a gel fraction of 99.03% were used as a core polymer, and abrupt firing at temperatures higher than 500°3C was adopted to remove the PMMA microspheres. The addition of 5 mass% SiO 2 to the Al 2 O 3 shell layer was found to be useful for maintaining the spherical shell structure during the firing process and for fabricating a large fraction of hollow alumina microspheres after the sintering.

This publication has 6 references indexed in Scilit: