FIB‐SEM investigation of trapped intermetallic particles in anodic oxide films on AA1050 aluminium
- 28 June 2011
- journal article
- Published by Emerald Publishing in Anti-Corrosion Methods and Materials
- Vol. 58 (4) , 173-178
Abstract
Purpose – The purpose of this investigation is to understand the structure of trapped intermetallics particles and localized composition changes in the anodized anodic oxide film on AA1050 aluminium substrates. Design/methodology/approach – The morphology and composition of Fe-containing intermetallic particles incorporated into the anodic oxide films on industrially pure aluminium (AA1050, 99.5 per cent) has been investigated. AA1050 aluminium was anodized in a 100?ml/l sulphuric acid bath with an applied voltage of 14?V at 20°C ±2°C for 10 or 120?min. The anodic film subsequently was analyzed using focused ion beam-scanning electron microscopy (FIB-SEM), SEM, and EDX. Findings – The intermetallic particles in the substrate material consisted of Fe or both Fe and Si with two different structures: irregular and round shaped. FIB-SEM cross-sectioned images revealed that the irregular-shaped particles were embedded in the anodic oxide film as a thin strip structure and located near the top surface of the film, whereas the round-shaped particles were trapped in the film with a spherical structure, but partially dissolved and were located throughout the thickness of the anodic film. The Fe/Si ratio of the intermetallic particles decreased after anodizing. Originality/value – This paper shows that dual beam FIB-SEM seems to be an easy, less time consuming and useful method to characterize the cross-sectioned intermetallic particles incorporated in anodic film on aluminium.Keywords
This publication has 12 references indexed in Scilit:
- Effect of alloy types on the anodizing process of aluminumSurface and Coatings Technology, 2006
- A transmission electron microscopy study of hard anodic oxide layers on AlSi(Cu) alloysElectrochimica Acta, 2004
- Oxygen evolution within barrier oxide filmsCorrosion Science, 2002
- The behaviour of iron during anodic oxidation of sputtering-deposited Al–Fe alloysCorrosion Science, 2001
- Selective oxidation of aluminium and interfacial enrichment of iron during anodic oxide growth on an Al6Fe phaseCorrosion Science, 2000
- Ultramicrotomy—a route towards the enhanced understanding of the corrosion and filming behaviour of aluminium and its alloysCorrosion Science, 1998
- Influence of Fe-bearing particles and nature of electrolyte on the hard anodizing behaviour of AA 7075 extrusion productsSurface and Coatings Technology, 1997
- The influence of θ′ precipitates on the anodizing behaviour of binary Al-Cu alloysCorrosion Science, 1997
- Copper enrichment in Al-Cu alloys due to electropolishing and anodic oxidationThin Solid Films, 1997
- Barrier-type anodic film formation on an Al-3.5 wt% Cu alloyCorrosion Science, 1996