Fluid Flow and Heat Transfer in a Rotating Two-Pass Square Duct With In-Line 90-deg Ribs
Authors:
- 1 April 2002
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 124 (2) , 260-268
Abstract
Laser-doppler velocimetry and transient thermochromic liquid crystal measurements are presented to understand local fluid flow and surface heat transfer distributions in a rotating ribbed duct with a 180 deg sharp turn. The in-line 90-deg ribs were arranged on the leading and trailing walls with rib height-to-hydraulic diameter ratio and pitch-to-height ratio of 0.136 and 10, respectively. The Reynolds number, based on duct hydraulic diameter and bulk mean velocity, was fixed at 1.0×104 whereas the rotational number varied from 0 to 0.2. Results are compared with those of the rotating smooth duct flow in terms of maximum streamwise mean velocities Umax/Ub and turbulence intensities u′max/Ub, skewness of mean velocity profiles, secondary flow pattern, turn-induced separation bubble, and turbulence anisotropy. Nusselt number ratio mappings are also provided on the leading and trailing walls. The relationships between the fluid flow and local heat transfer enhancement are also documented. It is found that the rotating ribbed duct flow provides higher Umax/Ub,u′max/Ub, and stronger total averaged secondary flow and, hence heat transfer is enhanced. Comparisons with heat transfer data published by other research groups are also made. Furthermore, simple linear correlations between regional averaged Nusselt number ratio and rotation number are developed.Keywords
This publication has 22 references indexed in Scilit:
- TLCT and LDV measurements of heat transfer and fluid flow in a rotating sharp turning ductInternational Journal of Heat and Mass Transfer, 2001
- Heat Transfer and Fluid Flow in a Square Duct With 12 Different Shaped Vortex GeneratorsJournal of Heat Transfer, 1999
- LDV Study of Developing Flows Through a Smooth Duct With a 180 deg Straight-Corner TurnJournal of Turbomachinery, 1999
- LDA Investigation of the Flow Development Through Rotating U-DuctsJournal of Turbomachinery, 1996
- Wall heating effect on local heat transfer in a rotating two-pass square channel with 90° rib turbulatorsInternational Journal of Heat and Mass Transfer, 1994
- Experimental Heat Transfer Investigation of Stationary and Orthogonally Rotating Asymmetric and Symmetric Heated Smooth and Turbulated ChannelsJournal of Turbomachinery, 1994
- Heat Transfer in Rotating Serpentine Passages With Trips Skewed to the FlowJournal of Turbomachinery, 1994
- Heat Transfer in Rotating Serpentine Passages With Trips Normal to the FlowJournal of Turbomachinery, 1992
- An Experimental Investigation of Heat Transfer Coefficients in a Spanwise Rotating Channel With Two Opposite Rib-Roughened WallsJournal of Turbomachinery, 1991
- Principles and Practice of Laser-Doppler AnemometryJournal of Applied Mechanics, 1977