Moisture Sorption Effects on Carbon Fiber-Reinforced Pheny L Ethnyl-Terminated UltemTM Composites
Authors:
- T. A. BullionsTBT. A. Bullions
- 1 November 2000
- journal article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 13 (6) , 460-480
Abstract
High-performance aerospace applications require materials that are able to withstand exposure to extreme temperatures, high relative humidities, solvents, and other chemicals. Due to their high-performance thermal and mechanical characteristics, poly(etherimide)s are being implemented in such applications. Prior to such use, environmental effects on material performance must be understood. In this study, the effects of moisture sorption on the mechanical properties of carbon-fiber-reinforced phenylethynyl-terminated poly(etherimide) matrix composites were investigated. The through-the-thickness moisture diffusion coefficient and the maximum moisture equilibrium content were determined for the unidirectional composites for exposure to 90'C and 85% relative humidity. In addition, the composites were tested for retention of transverse flexural strength and apparent interlaminar shear strength at maximum moisture equilibrium content. The same properties were tested for property retention following desorption of moisture to a 90'C, 2% relative humidity moisture content. The composite showed high mechanical property retention with recoverable matrix plasticization being the source of property reductions.Keywords
This publication has 10 references indexed in Scilit:
- Mode I and Mode II fracture toughness of high-performance 3000gmole−1 reactive poly(etherimide)/carbon fiber compositesComposites Part A: Applied Science and Manufacturing, 1999
- Effect of Moisture on the Interfacial Shear Strength: A Study Using the Single Fiber Fragmentation Test1997
- The Effects of Moisture on the Material Properties and Behavior of Thermoplastic Polyimide Composites1997
- Solvent-resistant polyetherimide network systems via phenylethynylphthalic anhydride endcappingHigh Performance Polymers, 1994
- Generation of thermal strains in carbon fibre-reinforced bismaleimide (PMR-15) compositesComposites, 1991
- Effects of Moisture Absorption on Edge Delamination, Part II: An Experimental Study of Jet Fuel Absorption on Graphite-Epoxy1991
- Introduction to Polymers1991
- Hygrothermal effects in CFRP laminates: Strains induced by temperature and moistureComposites, 1985
- On the Hygrothermal Response of Laminated Composite Systems †Journal of Composite Materials, 1976
- Moisture Absorption and Desorption of Composite MaterialsJournal of Composite Materials, 1976