Conducted EMI Investigation of a SiC-Based Multiplexing Converter for EV/PHEV
Open Access
- 13 April 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 58807-58823
Abstract
This paper investigates the conducted electromagnetic interference (EMI) characteristics of an on-board multiplexing converter that utilizes paralleled silicon carbide (SiC) devices to achieve high efficiency and high-power density for the application in electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs). The multiplexing converter can operate as a three-phase interleaved DC/DC converter with a peak output power of 60 kW or an integrated two-stage non-isolated on-board charger (OBC) with an output power of 6.6 kW. The novelty of this paper is that it reveals that in the DC/DC mode the series resonance between the input negative lead parasitic inductance and the high frequency transmission line effects of the input power inductor will increase the conducted EMI levels, which can be mitigated by optimizing the winding methods of the power inductor or by adding a small capacitor, and reveals that in the non-isolated OBC mode the shielded cable on the battery-side will increase the grid-side EMI in the low frequency ranges, which can be suppressed by integrated installation of EMI filters without affecting the system power density. Firstly, parasitic parameters of the components of the multiplexing converter, such as the power inductors, the SiC MOSFETs and the shielded cables, are extracted and validated with impedance measurements, and the corresponding equivalent circuit models are established. Then, the conducted EMI simulation models of the multiplexing converter in different working modes are established. The influence of different interference sources and different parasitic parameters on the system EMI characteristics are analyzed, and the effective EMI suppression measures are given without affecting the system power density. Finally, the conducted EMI characteristics of the multiplexing converter and the effectiveness of the proposed EMI suppression measures are tested and verified through experiments.Keywords
Funding Information
- National Key Research and Development Program of China (2018YFB0104602)
This publication has 39 references indexed in Scilit:
- Analysis of Parasitic Elements of SiC Power Modules With Special Emphasis on Reliability IssuesIEEE Journal of Emerging and Selected Topics in Power Electronics, 2016
- Common Mode Noise Analysis for Cascaded Boost Converter With Silicon Carbide DevicesIEEE Transactions on Power Electronics, 2016
- High-Efficiency 312-kVA Three-Phase Inverter Using Parallel Connection of Silicon Carbide MOSFET Power ModulesIEEE Transactions on Industry Applications, 2015
- A Common Mode Inductor With External Magnetic Field Immunity, Low-Magnetic Field Emission, and High-Differential Mode InductanceIEEE Transactions on Power Electronics, 2014
- Shaping High-Power IGBT Switching Transitions by Active Voltage Control for Reduced EMI GenerationIEEE Transactions on Industry Applications, 2014
- Closed-Loop d${\bm i}/$d ${\bm t}$ and d ${\bm v}/$d${\bm t}$ IGBT Gate DriverIEEE Transactions on Power Electronics, 2014
- Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid VehiclesIEEE Transactions on Power Electronics, 2013
- Characterization and Parasitic Extraction of EMI Filters Using Scattering ParametersIEEE Transactions on Power Electronics, 2005
- Effects of Parasitic Parameters on EMI Filter PerformanceIEEE Transactions on Power Electronics, 2004
- Balanced switching converter to reduce common-mode conducted noiseIEEE Transactions on Industrial Electronics, 2003