Effect of Saturation on Shear Behavior and Particle Breakage of Coral Sand
Open Access
- 10 September 2022
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (9) , 1280
Abstract
Coral sand is the main filling material for the island–reef foundation. Under tidal actions, the saturation (Sr) of coral sand layers varies with the specific depths in the reclaimed foundation. Studying the Sr effect of coral sand’s mechanical behaviors is crucial for the stability of the reclaimed foundation of island–reefs. In this study, a “quantitative injection method” was designed to prepare coral sand with saturation ranging from 90% to 100%, and unconsolidated–undrained (UU) triaxial shear tests were conducted on coral sand under different effective confining pressures (). The results indicated that the stress–strain curves of coral sand under various conditions were of the strain-softening type. When = 200, 400, 600, and 800 kPa, the shear strength of coral sand decreased exponentially by 13.1, 9.1, 16.8, and 15.2%, respectively, with the increase in Sr from 90% to 100%. As Sr rose, the internal friction angle (φ) dropped by 3.77°. The cohesion (c) was not significantly affected by Sr compared to φ. In consideration of the physical susceptibility of coral sand to breakage, relative breakage ratio (Br) and modified relative breakage index () were introduced to evaluate the particle breakage behaviors of coral sand samples with different Sr levels in the triaxial shear process. It was found that Br and increase linearly with increasing Sr; the effect of Sr on the particle breakage of coral sand weakens significantly when is sufficiently large. The median particle size (d50) of coral sand decreases with increasing Sr, and presents a negative linear correlation with both Br and . Based on comparing the strength and particle breakage characteristics of coral sand samples with varying Sr levels, this study suggests that 92.5% should be considered as the Sr value of coral sand available for testing.
Keywords
Funding Information
- National Natural Science Foundation of China (41772336, 42177151, 42177154)
This publication has 55 references indexed in Scilit:
- Experimental evaluation of mechanical behavior of unsaturated silty sand under constant water content conditionEngineering Geology, 2012
- Engineering characteristics of the calcareous sand in Nansha Islands, South China SeaEngineering Geology, 2011
- Breakage mechanics—Part I: TheoryJournal of the Mechanics and Physics of Solids, 2007
- Monotonic and Cyclic Behavior of Two Calcareous Soils of Different OriginsJournal of Geotechnical and Geoenvironmental Engineering, 2006
- Particle breakage during shearing of a carbonate sandGéotechnique, 2004
- Influence of pressure, saturation, and temperature on the behaviour of unsaturated sand-bentoniteCanadian Geotechnical Journal, 1998
- Crushing of Soil ParticlesJournal of Geotechnical Engineering, 1985
- Back Pressure Effects On The Undrained Strength Characteristics of Soft ClaySoils and Foundations, 1975
- Compressibility And Crushing Of Granular Soil In Anisotropic Triaxial CompressionCanadian Geotechnical Journal, 1967
- Energy Components During the Triaxial Cell and Direct Shear TestsGéotechnique, 1964