Hot Isostatic Pressing of a Presintered Yttria‐Stabilized Zirconia Ceramic
Authors:
- 1 September 1989
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 72 (9) , 1591-1597
Abstract
The effect of hot isostatic pressing on the bend strength of ZrO 2 –3 mol% Y 2 O 3 was critically dependent on the presintering process. Optimally sintered bodies contained no open porosity and exhibited large increases in strength following hot isostatic pressing. When open porosity of as little as 0.3% persisted after sintering, hot isostatic pressing increased the bulk density, but little or no increase in strength was realized. Two‐parameter Weibull analysis of the strength data was used to quantify the strength improvement obtained following hot isostatic pressing. Typical fracture‐initiating flaws were identified through optical and electron microscopy.Keywords
This publication has 16 references indexed in Scilit:
- Experimental probability estimators for Weibull plotsJournal of Materials Science Letters, 1986
- Mechanical properties of toughened ZrO 2 ‐Y 2 O 3 CeramicsJournal of the American Ceramic Society, 1986
- Effects of Postsintering Hot Isostatic Pressing on the Strength of an Aluminosilicate CeramicJournal of the American Ceramic Society, 1986
- Strength‐Toughness Relations in Sintered and Isostatically Hot‐Pressed ZrO 2 ‐Toughened Al 2 O 3Journal of the American Ceramic Society, 1986
- Grain‐Boundary Cavitation and Bloating of Isostatically Hot‐Pressed Magnesia‐Partially‐Stabilized Zirconia on Air AnnealingJournal of the American Ceramic Society, 1986
- Mechanical properties of Y-PSZ after aging at low temperatureInternational Journal of High Technology Ceramics, 1986
- Recent advances in hot isostatic pressing processes for high performance ceramicsMaterials Science and Engineering, 1985
- Densification of sintered lead zirconate titanate by hot isostatic pressingJournal of Materials Science, 1984
- Processing‐Related Fracture Origins: I, Observations in Sintered and Isostatically Hot‐Pressed A1 2 O 3 /ZrO 2 CompositesJournal of the American Ceramic Society, 1983
- Strengthening by Surface Damage in Metastable Tetragonal ZirconiaJournal of the American Ceramic Society, 1980