Ground Movement in the Hanging Wall of Underground Iron Mines with Steeply Dipping Discontinuities: A Case Study
- 3 May 2023
- journal article
- research article
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 48 (10) , 13465-13488
Abstract
To ensure the safety of underground mining activities and effectively protect the surface production facilities and houses of the nearby residents, the ground movement caused by the sublevel caving method needs to be studied. In this work, the failure behaviors of the surface and drift of the surrounding rock were investigated based on the results of in situ failure investigations, monitoring data, and engineering geological conditions. The results were then combined with theoretical analysis to reveal the mechanism responsible for the movement of the hanging wall. Driven by the in situ horizontal ground stress, horizontal displacement plays an imperative role in both the movement of the ground surface and underground drifts. Accelerated movement is found to occur in the ground surface which coincides with the occurrence of drift failure. Failure occurs in the deep rock masses and then gradually propagates to the surface. The steeply dipping discontinuities are the main reason for the unique ground movement mechanism in the hanging wall. As steeply dipping joints cut through the rock mass, the rock surrounding the hanging wall can be modeled as cantilever beams subjected to in situ horizontal ground stress and lateral stress due to caved rock. This model can be used to obtain a modified formula for toppling failure. Also, a mechanism of fault slipping was proposed, and the condition required for fault slipping was obtained. Based on the failure mechanism of steeply dipping discontinuities, the ground movement mechanism was proposed considering the horizontal in situ ground stress and caved rock mass: slippage of fault F3, slippage of fault F4, and toppling of rock columns. Based on the unique ground movement mechanism, the goaf surrounding rock mass could be divided into six zones: a caved zone, a failure zone, a toppling-slipping zone, a toppling-deformation zone, a fault-slipping zone, and a movement-deformation zone.Keywords
This publication has 32 references indexed in Scilit:
- Mining-induced ground deformation in tectonic stress metal mines: A case studyEngineering Geology, 2016
- Numerical Simulation of Squeezing Failure in a Coal Mine Roadway due to Mining-Induced StressesRock Mechanics and Rock Engineering, 2014
- Influence of an Inclined Rock Stratum on In-Situ Stress State in an Open-Pit MineGeotechnical and Geological Engineering, 2013
- Time-dependent movements of the hangingwall at the Kiirunavaara mineInternational Journal of Mining, Reclamation and Environment, 2012
- A geometric model of fault zone and fault rock thickness variationsJournal of Structural Geology, 2009
- Displacement, stress and seismicity in roadway roofs during mining-induced failureInternational Journal of Rock Mechanics and Mining Sciences, 2008
- The plastic zones and displacements around underground openings in rock masses containing a faultTunnelling and Underground Space Technology, 2005
- The disturbed zone around tunnels in jointed rock MassesInternational Journal of Rock Mechanics and Mining Sciences, 1997
- The squeezing potential of rocks around tunnels; Theory and predictionRock Mechanics and Rock Engineering, 1993
- The stability of slopes and underground openings against flexural toppling and their stabilisationRock Mechanics and Rock Engineering, 1992