Experimental Study on Corrosion and Mechanical Behavior of Main Cable Wires Considering the Effect of Strain
Open Access
Abstract
To study the corrosion degradation of cable wires in a bridge’s life, this research work created an accelerated corrosion test device, which sought to identify an optimal constant strain level. An accelerated corrosion test was carried out and the corroded specimens were scanned using super depth 3D microscopy technology. Mass loss and minimum cross-sectional diameter was measured to understand the degradation characteristics of cable wires at variable strains and corrosion time. The variation of elastic modulus, yield load, and ultimate load of corroded wires, subjected to a tensile test, were analyzed. The experimental results illustrate that the average mass loss ratio of the corroded cable wires increases nonlinearly as corrosion time increases. The higher the stress level, the more serious the corrosion level. The minimum cross-sectional diameter has good correlation with corrosion time and stress level. The elastic modulus of wires does not change significantly with the increase of corrosion time. Yield load and ultimate load decreases with the increase of strain level, and the rates of decline under different strains are nonlinear.Keywords
Funding Information
- Basic Public Welfare Research Project of Zhejiang Province (LGF18E080002)
- Natural Science Foundation of Zhejiang Province (LY18E080002)
This publication has 17 references indexed in Scilit:
- Effects of environmental factors on stress corrosion cracking of cold-drawn high-carbon steel wiresCorrosion Science, 2018
- Influence of tensile stress on corrosion behaviour of high‐strength galvanized steel bridge wires in simulated acid rainMaterials and Corrosion, 2010
- Hydrogen embrittlement and corrosion fatigue of corroded bridge wiresJournal of Constructional Steel Research, 2009
- Statistical Characterization of Pitting Corrosion—Part 1: Data AnalysisCorrosion, 2005
- Corrosion and Embrittlement in High-Strength Wires of Suspension Bridge CablesJournal of Bridge Engineering, 2005
- Environmental Factors Affecting Corrosion of Galvanized Steel WiresJournal of Materials in Civil Engineering, 2004
- Mechanical Properties and Remaining Strength of Corroded Bridge WiresStructural Engineering International, 2004
- Ultimate compressive strength of plate elements with pit corrosion wastageProceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2003
- Design of accelerated corrosion tests for electronic components in automotive applicationsIEEE Transactions on Components and Packaging Technologies, 2001
- Accelerated Corrosion and Embrittlement of High-Strength Bridge WireJournal of Materials in Civil Engineering, 2000