Influence of binder systems on sintering characteristics, microstructures, and mechanical properties of PcBN composites fabricated by SPS
Open Access
- 11 January 2022
- journal article
- research article
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 11 (2) , 321-330
Abstract
Cubic boron nitride (cBN) with high hardness, thermal conductivity, wear resistance, and chemical inertness has become the most promising abrasive and machining material. Due to the difficulty of fabricating pure cBN body, generally, some binders are incorporated among cBN particles to prepare polycrystalline cubic boron nitride (PcBN). Hence, the binders play a critical factor to the performances of PcBN composites. In this study, the PcBN composites with three binder systems containing ceramic and metal phases were fabricated by spark plasma sintering (SPS) from 1400 to 1700 °C. The sintering behaviors and mechanical properties of the composites were investigated. Results show that the effect of binder formulas on mechanical properties mainly related to the compactness, mechanical performances, and thermal expansion coefficient of binder phases, which affect the carrying capacity of the composites and the bonding strength between binder phases and cBN particles. The PcBN composite with SiAlON phase as binder presented optimal flexural strength (465±29 MPa) and fracture toughness (5.62±0.37 MPa·m1/2), attributing to the synergistic effect similar to transgranular and intergranular fractures. Meanwhile, the excellent mechanical properties can be maintained a comparable level when the temperature even rises to 800 °C. Due to the weak bonding strength and high porosity, the PcBN composites with Al2O3-ZrO2(3Y) and Al-Ti binder systems exhibited inferior mechanical properties. The possible mechanisms to explain these results were also analyzed.Keywords
This publication has 30 references indexed in Scilit:
- Investigation of MAX phase/c-BN compositesCeramics International, 2013
- Load-dependent indentation behavior of β-SiAlON and α-silicon carbideJournal of Advanced Ceramics, 2013
- Effect of time on microstructure and hardness of βSiAlON–cubic boron nitride composites during spark plasma sinteringCeramics International, 2011
- Detailed microstructure of a cBN based cutting tool materialInternational Journal of Refractory Metals and Hard Materials, 2009
- Intragranular Particle Residual Stress Strengthening of Al 2 O 3 –SiC NanocompositesJournal of the American Ceramic Society, 2005
- Cutting temperatures in hard turning chromium hardfacings with PCBN toolingJournal of Materials Processing Technology, 2004
- The effect of temperature on the hardness of polycrystalline cubic boron nitride cutting tool materialsInternational Journal of Refractory Metals and Hard Materials, 2004
- High-pressure sintering of cBN-TiN-Al composite for cutting tool applicationDiamond and Related Materials, 2002
- High‐Temperature Properties of Mixed α′/β′‐SiAlON MaterialsJournal of the American Ceramic Society, 1998
- Cubic boron nitride: synthesis, physicochemical properties and applicationsMaterials Science and Engineering: B, 1991