Equilibrium, kinetics, and thermodynamics of batch adsorption of Mn(II) ions on blast furnace slag (BFS) and kaolin (KGA)
Open Access
- 6 June 2023
- journal article
- research article
- Published by Springer Nature in Journal of Engineering and Applied Science
- Vol. 70 (1) , 1-20
Abstract
This article describes the discontinuous adsorption of Mn(II) on kaolin from Guelma, Algeria (KGA), and blast furnace slag from Sider, Algeria (BFS), under the effect of various parameters, namely the contact time, the stirring speed, the pH of the medium, the solution temperature, the adsorbent dosage, the solid particle size, and the initial concentration. Also studied were the models of adsorption, namely the isotherms of adsorption, the kinetics of adsorption, and the thermodynamic study of Mn on the examined adsorbents. Characterization tests have indicated that kaolin consists essentially of hydrated aluminum silicate. The BFS is mainly composed of silicates, aluminates, lime, and magnesium oxide. The specific surface areas of kaolin and BFS calculated using the BET were defined at 134.2 and 238.6m2/g. The adsorption rate of Mn(II) on KGA and BFS is better after 50 and 60 min of contact at Vag: 150 rpm; pH: 5.2; Øs: 100 μm; T: 20 °C; Ms: 1 g, respectively. Maximum adsorption capacities are 36.76 mg/g (KGA) and 59.88 mg/g (BFS). Examination of the adsorption isotherms revealed that the Langmuir model is more appropriate to the experimental data (R2 = 0.99). The values of the Freundlich (n), Langmuir (RL), and Temkin (bt) parameters indicate that the adsorption is favorable. The kinetic examination demonstrated that the pseudo-second-order kinetic model is more adopted for the adsorption of Mn(II) on KGA and BFS (R2 = 0.99). Furthermore, the transfer of Mn(II) from the solution to the surfaces of the investigated adsorbents is controlled by external and internal diffusion. The thermodynamic study brought to light that the adsorption processes carried out were spontaneous, exothermic, and less entropic. This work showed that KGA and BFS can be used as low-cost adsorbents for the removal of Mn(II) ions in aqueous media, and BFS has higher affinities for manganese ion adsorption.Keywords
This publication has 48 references indexed in Scilit:
- Kinetic of nickel (II) removal from aqueous solution using different particle size of water - cooled blast furnace slagDesalination and Water Treatment, 2015
- Simultaneous adsorption of Ni(II) and Mn(II) ions from aqueous solution unto a Nigerian kaolinite clayJournal of Materials Research and Technology, 2014
- Thiol-functionalized polysilsesquioxane as efficient adsorbent for adsorption of Hg(II) and Mn(II) from aqueous solutionMaterials Research Bulletin, 2014
- Chemical carbonization of papaya seed originated charcoals for sorption of Pb(II) from aqueous solutionJournal of Environmental Chemical Engineering, 2014
- Removal of manganese(II) ions from aqueous solutions by adsorption on activated carbon derived a new precursor: Ziziphus spina-christi seedsAlexandria Engineering Journal, 2012
- Removal of Reactive Yellow 84 from aqueous solutions by adsorption onto hydroxyapatiteJournal of Saudi Chemical Society, 2011
- Application of zeolite prepared from Egyptian kaolin for the removal of heavy metals: II. Isotherm modelsJournal of Hazardous Materials, 2010
- Biosorption studies on powder of stem of Acacia nilotica: Removal of arsenic from surface waterJournal of Hazardous Materials, 2010
- Biosorption of reactive dyes on the green alga Chlorella vulgarisProcess Biochemistry, 2005
- THE ADSORPTION OF GASES ON PLANE SURFACES OF GLASS, MICA AND PLATINUM.Journal of the American Chemical Society, 1918