Compressive Properties of 3D Printed Polylactic Acid Matrix Composites Reinforced by Short Fibers and SiC Nanowires
Authors:
- 10 October 2018
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 21 (5)
Abstract
Fused deposition modeling (FDM) as a rapidly growing additive manufacturing technology is successfully applied to several industries. In this study, effects of printing layer thickness, reinforcement types, and silicon carbide nanowire (SiCnw) brushing layers on compressive properties are investigated by comparing the strength and modulus of the FDM specimens acquired from compression tests. First of all, the printing layer thickness determines the strength of the printed specimens, the pure polylactic acid (PLA), the PLA reinforced by short carbon fiber (Cf/PLA), and the PLA reinforced by graphene (G/PLA). The results indicate that both strength and elastic modulus of the printed specimens increase with the decrease of the printing layer thickness. Therefore, the effects of different reinforcement types on the mechanical properties are further investigated at the same printing layer thickness. It indicates that the printed Cf/PLA receives the highest elastic modulus up to 1.69 GPa due to the high modulus of carbon fiber. Finally, the SiCnw brushing layers between the printed PLA layers are found to significantly increase the compressive modulus and there is a growth of 55.1% from pure PLA to PLA with three SiCnw brushing layers.Keywords
Funding Information
- Program for New Century Excellent Talents in University (NCET‐13‐0474)
This publication has 25 references indexed in Scilit:
- Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structureMaterials & Design (1980-2015), 2015
- Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin–streptavidin interactionsComposites Science and Technology, 2012
- Developments in construction-scale additive manufacturing processesAutomation in Construction, 2012
- Dual-Scale Polymeric Constructs as Scaffolds for Tissue EngineeringMaterials, 2011
- Effects of layer thickness and binder saturation level parameters on 3D printing processThe International Journal of Advanced Manufacturing Technology, 2010
- Parametric appraisal of mechanical property of fused deposition modelling processed partsMaterials & Design (1980-2015), 2010
- Numerical and analytical method for the design of piezoelectric modal sensors/actuators for shell‐type structuresInternational Journal for Numerical Methods in Engineering, 2009
- Measurement of anisotropic compressive strength of rapid prototyping partsJournal of Materials Processing Technology, 2007
- New developments in fused deposition modeling of ceramicsRapid Prototyping Journal, 2005
- Anisotropic material properties of fused deposition modeling ABSRapid Prototyping Journal, 2002