In Situ Polymerized PAN-Assisted S/C Nanosphere with Enhanced High-Power Performance as Cathode for Lithium/Sulfur Batteries
Authors:
Open Access
- 22 July 2015
- journal article
- research article
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 15 (8) , 5116-5123
Abstract
Carbonaceous and polymer materials are extensively employed as conductor and container to encapsulate sulfur particles and limit polysulfide dissolution. Even so, high-power performance is still far from satisfaction due to the expansion and collapse of the electrode materials during thousands of charge–discharge process. Herein, it is found that colloidal carbon sphere with high elastic coefficient can be utilized as a framework to load sulfur, which can trap soluble polysulfides species in the pores within the sphere and efficaciously improve the electronic conductivity of the cathode. After modified by polyaniline (PAN) through in situ polymerization, PAN-assisted S/C nanosphere (PSCs-73, with 73 wt % sulfur) effectively minimize polysulfide diffusion, enhance the electron transfer rate and overcome the problem of volume expansion. The fabricated PSCs-73 cell shows outstanding long high-power cycling capability over 2500 charge/discharge cycles with a capacity decay of 0.01% per cycle at 5 C. Substantially, this composite can drive 2.28 W white indicators of LED robustly after minutes of charging by three lithium batteries in series, showing a promising potential application in the future.Keywords
Funding Information
- Ministry of Education of the People's Republic of China (CCNU15KFY005, CCNU15ZD007)
- Natural Science Foundation of Hubei Province (2015CFA037)
- National Natural Science Foundation of China (21377044)
- Wuhan Planning Project of Science and Technology (2014010101010023)
This publication has 37 references indexed in Scilit:
- Improved lithium–sulfur batteries with a conductive coating on the separator to prevent the accumulation of inactive S-related species at the cathode–separator interfaceEnergy & Environmental Science, 2014
- Polysulfide Flow Batteries Enabled by Percolating Nanoscale Conductor NetworksNano Letters, 2014
- Conducting linear chains of sulphur inside carbon nanotubesNature Communications, 2013
- Lithium Polysulfidophosphates: A Family of Lithium‐Conducting Sulfur‐Rich Compounds for Lithium–Sulfur BatteriesAngewandte Chemie International Edition, 2013
- New Approaches for High Energy Density Lithium–Sulfur Battery CathodesAccounts of Chemical Research, 2012
- Enhanced Cyclability of Lithium–Sulfur Batteries by a Polymer Acid-Doped Polypyrrole Mixed Ionic–Electronic ConductorChemistry of Materials, 2012
- An Advanced Lithium‐Sulfur BatteryAdvanced Functional Materials, 2012
- A Polyaniline‐Coated Sulfur/Carbon Composite with an Enhanced High‐Rate Capability as a Cathode Material for Lithium/Sulfur BatteriesAdvanced Energy Materials, 2012
- Challenges in the development of advanced Li-ion batteries: a reviewEnergy & Environmental Science, 2011
- New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific EnergyNano Letters, 2010