Improvement of Stockbridge Damper Design for Cable-Stayed Bridges
Open Access
- 12 November 2024
- journal article
- research article
- Published by MDPI AG in Applied Mechanics
- Vol. 5 (4) , 818-838
Abstract
Stockbridge dampers are widely used to mitigate the vibrations of cable-stayed bridges and of many other cable-suspended or cable structures exposed to the action of pedestrians, traffic or wind load. Within the current research work, one of the most effective and likely used damper types, the Stockbridge damper, was investigated to support its design and application within the daily engineering praxis. The Stockbridge damper has a relatively simple structural layout, which ensures its modular design allows it to easily adapt the damper to cables having different dynamic properties (eigenfrequencies, mass, etc.). This paper focuses on two main research areas: (i) to understand the static and dynamic behaviour of the damper and the stay cable interaction to investigate the effectiveness of its damping; (ii) to study the sensitivity of the natural frequencies of the damper to the design parameters. The final aim of the research is to develop a simple design method that is easy to apply in engineering practice and allows the efficient adaptation of the Stockbridge damper to different cable-stayed bridges. Key findings include the recommendation to position the damper at approximately 20% of the cable length for optimal attenuation, the importance of detuning to maintain effectiveness under varying cable forces, and the observation that increasing the damper mass improves efficiency, particularly for detuned elements.Keywords
Funding Information
- Magyar Tudományos Akadémia (Lendület LP2021-06/2021, ÚNKP-23-2-II-BME-266)
- Hungarian National Research, Development and Innovation Office (Lendület LP2021-06/2021, ÚNKP-23-2-II-BME-266)
This publication has 28 references indexed in Scilit:
- Control of longitudinal movement response of suspension bridges induced by passing trains using low-exponent fluid viscous dampersStructures, 2024
- Seismic retrofit of low-rise structures using rotational viscoelastic dampersStructures, 2023
- Improving cable-stayed bridge longitudinal aseismic capability via fluid viscous damper parametric optimization and experimental investigationStructures, 2023
- Suppression of vortex-induced high-mode vibrations of a cable-damper system by an additional damperEngineering Structures, 2021
- A comparative study of multi-mode cable vibration control using viscous and viscoelastic dampers through field tests on the Sutong BridgeEngineering Structures, 2020
- Multimode cable vibration control using a viscous‐shear damper: Case studies on the Sutong BridgeStructural Control and Health Monitoring, 2020
- Tuned mass-high damping rubber damper on a taut cableKSCE Journal of Civil Engineering, 2017
- COMPUTATIONAL ANALYSIS OF AEOLIAN CONDUCTOR VIBRATION WITH A STOCKBRIDGE-TYPE DAMPERJournal of Fluids and Structures, 2000
- OPTIMUM DYNAMIC CHARACTERISTICS OF STOCKBRIDGE DAMPERS FOR DEAD-END SPANSJournal of Sound and Vibration, 1995
- A practical method of passive TMD for suppressing wind-induced vertical buffeting of long-span cable-stayed bridges and its applicationJournal of Wind Engineering and Industrial Aerodynamics, 1994