Thermal stabilization of recycled PLA for 3D printing by addition of charcoal
Open Access
- 15 September 2023
- journal article
- research article
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 148 (23) , 13107-13119
Abstract
Poly(lactic acid) (PLA) is one of the most widely used thermoplastic materials for 3D printing, particularly in the Fused Filament Fabrication technique. However, the printing process generates waste products and even though PLA is compostable, the possibility of recycling it provides ecological and economical benefits. In this work, a study on the stabilization of recycled PLA using charcoal (CC) was carried out, with the aim of overcoming the well-known problem of degradation (reduction in molecular weight) of PLA, during remelting. Microscopic investigations showed good dispersion of the filler in the polymer matrix, as well as better adhesion between the printed layers. Thermal analyses (Differential scanning calorimetry and thermogravimetry) indicate a stabilization of PLA waste because of the addition of small concentrations of CC to the recycled polymer matrix. These data are confirmed by GPC analyses, which show that the addition of filler is associated with higher molecular weight. Mechanical analysis indicated improved elongation at break and elasticity. Finally, a key ring was printed as an example of the better printability of the filament containing CC. The results indicate that a stabilization of the recycled PLA with a very low concentration of CC has been achieved. Improved 3D printability and properties of the 3D printed objects can be attained through recycling and recovery of wasted PLA, according to sustainability and circular economy matters.Keywords
Funding Information
- Università del Salento
This publication has 51 references indexed in Scilit:
- Effect of molecular weight on the nucleation efficiency of poly(lactic acid) crystalline phasesJournal of Polymer Research, 2017
- Polymer recycling in an open-source additive manufacturing context: Mechanical issuesAdditive Manufacturing, 2017
- Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid3D Printing and Additive Manufacturing, 2017
- Polylactide/lignin blendsJournal of Thermal Analysis and Calorimetry, 2017
- Thermal characterization of chicken feather/PLA biocompositesJournal of Thermal Analysis and Calorimetry, 2017
- 3D printing of hydroxyapatite polymer-based composites for bone tissue engineeringJournal of Polymer Engineering, 2017
- Kinetic study of thermal degradation of poly(l-lactide) filled with β-zeoliteJournal of Thermal Analysis and Calorimetry, 2016
- Structure evolution of α′‐phase poly(lactic acid)Journal of Polymer Science Part B: Polymer Physics, 2011
- Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical propertiesPolymer Degradation and Stability, 2010
- Effect of dissolved carbon dioxide on the glass transition and crystallization of poly(lactic acid) as probed by ultrasonic measurementsJournal of Applied Polymer Science, 2009