Second Paper: The Effects of Physical Factors on Ignition Delay
Authors:
- 1 January 1966
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers: Automobile Division
- Vol. 181 (1) , 34-59
Abstract
The effects of physical factors on ignition delay have been studied on a motored research engine using a single injection technique. The fuels used included a high cetane number reference fuel, gas oil and M.T. 80 petrol. The primary factors investigated are those pertaining to the fuel spray, such as injection timing, quantity, and pressure (affecting drop size, velocity and injection rate); hole diameter (affecting drop size and injection rate) and spray form (nozzle type); and those pertaining to the engine, such as temperature, pressure and air velocity. Engine operating variables such as speed and load affect the ignition delay because they change the primary factors such as injection pressure, compression temperature, pressure and air velocity. It has been found that under normal running conditions, compression temperature and pressure are the major factors. All other factors have only secondary effects. Under starting conditions, when ignition is marginal, mixture formation becomes as important as compression temperature and pressure. Such factors as air velocity and spray form which affect the mixing pattern can have a very pronounced effect on ignition delay. Published data on ignition delay are compared with those obtained in the present investigation and a generalization of the data is recommended for engine design and computational work.Keywords
This publication has 10 references indexed in Scilit:
- Ex Opera Et IndustriaProceedings of the Institution of Mechanical Engineers, 1965
- Paper 1: The Breathing and Combustion Requirements of the Small High-Speed Diesel EngineProceedings of the Institution of Mechanical Engineers, Conference Proceedings, 1965
- Knock reactionSymposium (International) on Combustion, 1963
- The Application of High Speed Schlieren PhotographY to Diesel Combustion ResearchThe Journal of Photographic Science, 1962
- Influences of Direction of Fuel Injection and Wall Temperature upon Combustion in a Diesel EngineBulletin of JSME, 1962
- Gas Temperatures During Compression in Motored and Fired Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 1962
- Evaporation and combustion of a drop contacting with a hot surfaceSymposium (International) on Combustion, 1958
- Measurement of -- Gas Temperature in an Engine by the VELOCITY OF SOUND METHODSAE International Journal of Advances and Current Practices in Mobility, 1958
- Fuel Vaporization and Ignition Las in Diesel CombustionSAE International Journal of Advances and Current Practices in Mobility, 1956
- Physical and Chemical Ignition Delay in an Operating Diesel Engine Using the Hot-Motored TechniqueSAE International Journal of Advances and Current Practices in Mobility, 1956