Investigation on the Cyclic Response of Superelastic Shape Memory Alloy (SMA) Slit Damper Devices Simulated by Quasi-Static Finite Element (FE) Analyses
Author:
Open Access
- 11 February 2014
- Vol. 7 (2) , 1122-1141
Abstract
In this paper, the superelastic shape memory alloy (SMA) slit damper system as an alternative design approach for steel structures is intended to be evaluated with respect to inelastic behavior simulated by refined finite element (FE) analyses. Although the steel slit dampers conventionally used for aseismic design are able to dissipate a considerable amount of energy generated by the plastic yielding of the base materials, large permanent deformation may occur in the entire structure. After strong seismic events, extra damage repair costs are required to restore the original configuration and to replace defective devices with new ones. Innovative slit dampers fabricated by superelastic SMAs that automatically recover their initial conditions only by the removal of stresses without heat treatment are introduced with a view toward mitigating the problem of permanent deformation. The cyclically tested FE models are calibrated to experimental results for the purpose of predicting accurate behavior. This study also focuses on the material constitutive model that is able to reproduce the inherent behavior of superelastic SMA materials by taking phase transformation between austenite and martensite into consideration. The responses of SMA slit dampers are compared to those of steel slit dampers. Axial stress and strain components are also investigated on the FE models under cyclic loading in an effort to validate the adequacy of FE modeling and then to compare between two slit damper systems. It can be shown that SMA slit dampers exhibit many structural advantages in terms of ultimate strength, moderate energy dissipation and recentering capability.Keywords
This publication has 17 references indexed in Scilit:
- Seismic analysis and evaluation of several recentering braced frame structuresProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013
- Cyclic damage model for E-shaped dampers in the seismic isolation systemJournal of Mechanical Science and Technology, 2013
- Continuum Models for the Plastic Deformation of Octet-Truss Lattice Materials Under Multiaxial LoadingJournal of Engineering Materials and Technology, 2013
- Inelastic behavior of smart recentering buckling-restrained braced frames with superelastic shape memory alloy bracing systemsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2012
- Hysteretic model for steel energy dissipation devices and evaluation of a minimal-damage seismic design approach for steel buildingsJournal of Constructional Steel Research, 2012
- Seismic design, performance, and behavior of composite-moment frames with steel beam-to-concrete filled tube column connectionsInternational Journal of Steel Structures, 2010
- Two-Way Bending Properties of Shape Memory Composite with SMA and SMPMaterials, 2009
- Experimental study of steel slit damper for passive energy dissipationEngineering Structures, 2008
- Seismic demands on steel braced frame buildings with buckling-restrained bracesEngineering Structures, 2003
- Supplemental energy dissipation: state-of-the-art and state-of-the-practiceEngineering Structures, 2002