Approaches to Poly(Tetrafluoroethylene) Adhesive Bonding
- 1 July 2011
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 87 (7-8) , 709-719
Abstract
In this work, we present an approach to achieve improved adhesive bonding with a poly(tetrafluoroethylene) (PTFE) substrate. Surfaces were modified by abrasion, atmospheric air plasma torch (APPT) treatment, and by immersion in basic (NaOH) and strongly acidic/oxidizing (HNO3/KMnO4) solutions. The wetting properties of the polymer were studied in terms of surface energy, and adhesion tests were carried out using polyurethane, acrylic, and epoxy adhesives. The surface characterisation included surface energy calculation through contact angle measurements, infrared spectroscopy (FTIR-ATR), scanning electron microscopy (SEM), and X-ray electron diffraction (EDX). Adhesion was evaluated by pull-off tests following the UNE EN-24624 standard. Experiments revealed that both oxidation and plasma treatment enhanced surface energy, defluorination, and the creation of a rougher PTFE surface, resulting in adhesion. Simple oxidation and its combination with plasma treatments yielded the higher tensile strength results, with epoxy as the most suitable adhesive among those studied. Samples presented adhesive or mixed type failure modes.Keywords
This publication has 14 references indexed in Scilit:
- Extreme durability of wettability changes on polyolefin surfaces by atmospheric pressure plasma torchSurface and Coatings Technology, 2010
- Control of Wettability of Polymers by Surface Roughness ModificationJournal of Adhesion Science and Technology, 2010
- Surface modification of porous poly(tetrafluoraethylene) film by a simple chemical oxidation treatmentApplied Surface Science, 2010
- Surface analysis of long-distance oxygen plasma sterilized PTFE filmApplied Surface Science, 2009
- Studies on surface graft polymerization of acrylic acid onto PTFE film by remote argon plasma initiationApplied Surface Science, 2007
- Modification of the adhesion properties of PTFE by a magnesium treatmentInternational Journal of Adhesion and Adhesives, 2001
- Insertion of sulfur-containing functional groups into polytetrafluoroethylene (PTFE) by low pressure plasma treatmentSurface and Coatings Technology, 1999
- Influence of chemical and plasma treatments on the adhesive properties of PTFE with an epoxy resinInternational Journal of Adhesion and Adhesives, 1996
- Photochemical modification of a fluoropolymer surfaceMacromolecules, 1991
- THE HALF-LIFE OF A3Σu+ NITROGEN1,2The Journal of Physical Chemistry, 1963