Utilization of polyethylene terephthalate waste as a carbon filler in polypropylene matrix: Investigation of mechanical, rheological, and thermal properties
- 17 November 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (17)
Abstract
Polyethylene terephthalate (PET) waste was converted into carbon and the feasibility of utilizing it as a reinforcing filler material in a polypropylene (PP) matrix was investigated. The carbon produced by the pyrolysis of waste PET at 900°C in nitrogen atmosphere contains high carbon content (>70 wt%). PP/carbon composites were produced by melt blending process at varying loading concentrations. Scanning electron microscopy images at the fractured surface revealed that the carbon filler has better compatibility with the PP matrix. The mechanical, thermal, and rheological properties and surface morphology of the prepared composites were studied. The thermogravimetric analysis studies showed that the thermal stability of the PP/carbon composites was enhanced from 300 to 370°C with 20 wt% of carbon. At lower angular frequency (0.01 rad/s), the storage modulus (G′) of PP was 0.27 Pa and those of PP with 10 and 20 wt% carbon was 4.06 and 7.25 Pa, respectively. Among the PP/carbon composite prepared, PP with 5 wt% carbon showed the highest tensile strength of 38 MPa, greater than that of neat PP (35 MPa). The tensile modulus was enhanced from 0.9 to 1.2 GPa when the carbon content was increased from 0 to 20 wt%.Keywords
Funding Information
- King Saud University (RG‐1441‐539)
This publication has 53 references indexed in Scilit:
- Poly(propylene)/Graphene Nanoplatelet Nanocomposites: Melt Rheological Behavior and Thermal, Electrical, and Electronic PropertiesMacromolecular Chemistry and Physics, 2011
- Microstructure and Properties of Polypropylene/Carbon Nanotube NanocompositesMaterials, 2010
- A review of waste management practices and their impact on human healthWaste Management, 2009
- Raman spectroscopy of graphene and graphite: Disorder, electron–phonon coupling, doping and nonadiabatic effectsSolid State Communications, 2007
- Post Consumer Pet Depolymerization by Acid HydrolysisPolymer-Plastics Technology and Engineering, 2007
- Continuous flow cracking of waste plasticsFuel Processing Technology, 2005
- Depolymerization Mechanism of Poly(ethylene terephthalate) in Supercritical MethanolIndustrial & Engineering Chemistry Research, 2005
- Study on methanolytic depolymerization of PET with supercritical methanol for chemical recyclingPolymer Degradation and Stability, 2002
- Interpretation of Raman spectra of disordered and amorphous carbonPhysical Review B, 2000
- Thermal behaviour of polypropylene fractions: 1. Influence of tacticity and molecular weight on crystallization and melting behaviourPolymer, 1993