A Review of Purge Air Designs for Aeroengine-Based Optical Pyrometers
Authors:
- 1 April 2002
- journal article
- review article
- Published by Wiley in Journal of Turbomachinery
- Vol. 124 (2) , 227-234
Abstract
With the advent of "power by the hour" type agreements within the civil aeroengine market, the application of engine monitoring system data has reached the level of strategic use for informed decision making in not only the aftermarket but increasingly in the contract negotiation stage. One of the key cost drivers in these dollar-per-hour contracts for the OEMs to analyze is the life and maintenance requirements of the turbine blades leading ultimately to blade life management. Such life management of key components is of critical importance to ensure that the economic and technical risks to both service provider and customer are minimized. The optical pyrometer, through providing a direct temperature measurement of the turbine blades, is a primary input for providing a more realistic assessment of the component’s operating history associated with the use of life usage/remaining algorithms. However, the greatest concern with the in-service use of pyrometry is the issue of fouling since the pyrometer’s lens is exposed to the turbine environment. The level of optical contamination is usually minimized by introducing purge air, bled from the compressor, down the sight tube to prevent both the build-up of contaminants on the exposed system optics and particles in the gas stream from coming in contact with the lens. This paper provides a review of purge air designs and the key methodologies for engine designers to be acquainted with when seeking to integrate the use of optical pyrometry systems in new engine concepts.Keywords
This publication has 6 references indexed in Scilit:
- An Infrared Pyrometry System for Monitoring Gas Turbine Blades: Development of a Computer Model and Experimental ResultsJournal of Engineering for Gas Turbines and Power, 1994
- Inertial impaction of fine particles at moderate reynolds numbers and in the transonic regime with a thin-plate orifice nozzleJournal of Aerosol Science, 1990
- The use of optical pyrometers in axial flow turbines1989
- Evaluating lens purge systems for optical sensors on turbine engines1988
- The particle trap impactorJournal of Aerosol Science, 1988
- A Radiation Pyrometer Designed for In-Flight Measurement of Turbine Blade TemperaturesSAE International Journal of Advances and Current Practices in Mobility, 1969