Quantitative assessment and optimization of parallel contact model for flexible paddy straw: a definitive screening and central composite design approach using discrete element method
Open Access
- 23 January 2024
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-15
Abstract
To simulate the bending behaviour of paddy straw at varied moisture contents after crop harvesting, we created a flexible paddy straw specimen model based on the Hertz–Mindlin with parallel contact bonding model using the discrete element model (DEM) approach. The research presented in this study aims to investigate a new approach called Definitive Screening Design (DSD) for parameterizing and screening the most significant parameters of the DEM model. This investigation will specifically focus on the three-point bending test as a means of parameterization, and the shear plate test will be used for validation purposes. In addition, the most influential DEM parameters were optimized using another Design of Experiments approach called Central Composite Design. The findings from the DSD indicated that parameters such as bonded disk scale, normal stiffness, and shear stiffness have the highest impact on the bending force, while the coefficient of static friction (Straw-Steel) has the least effect. The three bonding parameters were respectively calibrated with the loading rate (0.42, 0.5, and 0.58 mm s−1) and a good agreement between actual and simulated shear force at moisture content M1—35 ± 3.4%, M2—24 ± 2.2% and M3—17 ± 2.6%. Modelled stem helps simulate the straw with low error and increases the accuracy of the simulation. The validated model, with an average relative error of 5.43, 7.63, and 8.86 per cent, produced reasonable agreement between measured and simulated shear force value and loading rate.Keywords
This publication has 29 references indexed in Scilit:
- Modelling residue incorporation of selected chisel ploughing tools using the discrete element method (DEM)Soil and Tillage Research, 2020
- Evaluation of straw spatial distribution after straw incorporation into soil for different tillage toolsSoil and Tillage Research, 2020
- A bonded sphero-cylinder model for the discrete element simulation of elasto-plastic fibersChemical Engineering Science, 2018
- Effective Design-Based Model Selection for Definitive Screening DesignsTechnometrics, 2017
- A discrete element approach for modelling bendable crop stemsComputers and Electronics in Agriculture, 2016
- Performance Evaluation of Tractor Operated Paddy Straw MulcherJournal of Krishi Vigyan, 2016
- Discrete-element method simulation of agricultural particles’ motion in variable-amplitude screen boxComputers and Electronics in Agriculture, 2015
- Simulation of grain–straw separation by Discrete Element Modeling with bendable straw particlesComputers and Electronics in Agriculture, 2014
- CFD–DEM simulation of material motion in air-and-screen cleaning deviceComputers and Electronics in Agriculture, 2012
- Discussion: A discrete numerical model for granular assembliesGéotechnique, 1980