Preparation and Phosphine Adsorption of Activated Carbon Prepared from Walnut Shells by KOH Chemical Activation
Authors:
- 10 June 2014
- journal article
- research article
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 49 (15) , 2366-2375
Abstract
Walnut-shell activated carbons (WSACs) with high surface area and predominant micropore development were prepared by KOH chemical activation. The effects of carbonization temperature, activation temperature, and ratio of KOH to chars on the pore development of WSACs and PH3 adsorption performance of the modified walnut-shell activated carbons (MWSACs) were studied. Criteria for determining the optimum preparation conditions were pore development of WSACs and PH3 breakthrough adsorption capacity of MWSAC adsorbents. The result shows that the optimum preparation conditions are a carbonization temperature of 700°C, an activation temperature of 700°C, and a mass ratio of 3. The BET surface area and the micropore volume of the optimal WASC are 1636m2/g and 0.641cm3/g, respectively. The micropore volume percentage of WSAC plays an important role in PH3 adsorption when there is a slight difference in BET surface areas. High-surface-area WSACs with predominant micropores are suitable for PH3 adsorption removal. The MWSAC adsorbent owns the biggest PH3 breakthrough adsorption capacity (284.12mg/g) due to the biggest specific surface area, total pore volume, and micropore volume percentage. The MWSAC adsorbent will be a potential adsorbent for PH3 adsorption removal from yellow phosphorus tail gas.Keywords
This publication has 32 references indexed in Scilit:
- Phosphine Adsorption Removal from Yellow Phosphorus Tail Gas over CuO−ZnO−La2O3/Activated CarbonIndustrial & Engineering Chemistry Research, 2011
- A new method on producing high surface area activated carbon: The effect of salt on the surface area and the pore size distribution of activated carbon prepared from pistachio shellChemical Engineering Journal, 2011
- Effect of zinc and cerium addition on property of copper-based adsorbents for phosphine adsorptionJournal of Rare Earths, 2010
- Utilization of agro-industrial and municipal waste materials as potential adsorbents for water treatment—A reviewChemical Engineering Journal, 2010
- Adsorption of low concentration phosphine in yellow phosphorus off-gas by impregnated activated carbonJournal of Hazardous Materials, 2009
- Equilibrium and heat of adsorption of phosphine on CaCl2‐modified molecular sieveAsia-Pacific Journal of Chemical Engineering, 2009
- Adsorption kinetics and equilibrium of copper from aqueous solutions using hazelnut shell activated carbonChemical Engineering Journal, 2009
- Experimental and modeling of fixed-bed reactor for yellow phosphorous tail gas purification over impregnated activated carbonChemical Engineering Journal, 2008
- The adsorption and subsequent oxidation of AsH3 and PH3 on activated carbonJournal of Crystal Growth, 1988
- Sorption of phosphine by activated carbon cloth and the effects of impregnation with silver and copper nitrates and the presence of waterCarbon, 1985