Evaluation of Asphalt Mixture Low-Temperature Performance in Bending Beam Creep Test
Open Access
Abstract
Low-temperature cracking is one of the most common road pavement distress types in Poland. While bitumen performance can be evaluated in detail using bending beam rheometer (BBR) or dynamic shear rheometer (DSR) tests, none of the normalized test methods gives a comprehensive representation of low-temperature performance of the asphalt mixtures. This article presents the Bending Beam Creep test performed at temperatures from −20 °C to +10 °C in order to evaluate the low-temperature performance of asphalt mixtures. Both validation of the method and its utilization for the assessment of eight types of wearing courses commonly used in Poland were described. The performed test indicated that the source of bitumen and its production process (and not necessarily only bitumen penetration) had a significant impact on the low-temperature performance of the asphalt mixtures, comparable to the impact of binder modification (neat, polymer-modified, highly modified) and the aggregate skeleton used in the mixture (Stone Mastic Asphalt (SMA) vs. Asphalt Concrete (AC)). Obtained Bending Beam Creep test results were compared with the BBR bitumen test. Regression analysis confirmed that performing solely bitumen tests is insufficient for comprehensive low-temperature performance analysis.Keywords
Funding Information
- Dean of the Faculty of Civil and Environmental Engineering, Gdansk University of Technology (GRAM)
- National Center for Research and Development and the General Directorate for National Roads and Motorways (RID-1B)
This publication has 36 references indexed in Scilit:
- Prediction of Asphalt Creep Compliance Using Artificial Neural NetworksArchives of Civil Engineering, 2012
- Numerical Simulation of the Bending Creep Test for Asphalt MixtureAdvanced Materials Research, 2012
- Multiscale fracture simulation of three-point bending asphalt mixture beam considering material heterogeneityEngineering Fracture Mechanics, 2011
- Simulation and Characterization of Asphalt Pavement TemperaturesRoad Materials and Pavement Design, 2009
- Reversible Aging in Asphalt BindersEnergy & Fuels, 2007
- Thermomechanical and Mechanical Behaviour of Asphalt Mixtures at Cold TemperatureRoad Materials and Pavement Design, 2004
- General “2S2P1D” Model and Relation Between the Linear Viscoelastic Behaviours of Bituminous Binders and MixesRoad Materials and Pavement Design, 2003
- Laboratory study on the low temperature physical hardening of conventional and polymer modified bitumensConstruction and Building Materials, 2000
- Physical Hardening of Asphalt Binders Relative to Their Glass Transition TemperaturesTransportation Research Record: Journal of the Transportation Research Board, 1999
- Non-linear viscoelastic behaviour of conventional and modified asphaltic concrete under creepMaterials and Structures, 1992