Mechanical to physical aspects of PP and LDPE plastic waste for potential wood plastic composite
Authors:
- Sigit Tri WicaksonoSWSigit Tri Wicaksono
- Haniffudin NurdiansahHNHaniffudin Nurdiansah
- Rohman SidikRSRohman Sidik
- Amaliya RasyidaARAmaliya Rasyida
- 1 January 2021
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2384 (1) , 050010
Abstract
Indonesia has been addressing a big effort to overcome the waste issues. There are million tons of waste contributed to pollute the environment that consist of about 14% is plastic waste from total of 70% of organic waste. From many types of the plastic waste, LOPE and PP has percentage about 23% and 14%. The aims of this study are to analyze the effect of adding the PP and LOPE in physical and mechanical properties of wood plastic composite LOPE/PP/sawdust. In this study, wood plastic composites (WPC) were made from LOPE, PP and teak wood powder which the volume fraction of teak wood powder is 30%. Then the different volume fraction of PP and LOPE is used in fabrication process of the environmentally friendly rooftile. The results showed that the adding LOPE is better than adding PP in improved the mechanical properties (flexural stress, compression strength, hardness) and physical properties (water absorbability and density) of WPC. Then, the WPC which has the best physical and mechanical properties is WPC with 70% LOPE 0% PP 30% sawdust with density 1,081 g/cm3, water absorbability 0,01%, flexural stress 11 MPa, hardness shore O is 40.33, and the compressive strength is 10.8 MPa.Keywords
This publication has 5 references indexed in Scilit:
- Study of the Effect of PP and LDPE Thermoplastic Binder Addition on the Mechanical Properties and Physical Properties of Particulate Composites for Building Material ApplicationMaterials Science Forum, 2019
- Use of waste plastic materials for road construction in GhanaCase Studies in Construction Materials, 2017
- Investigation of the curing kinetics of alkyd–melamine–epoxy resin systemProgress in Organic Coatings, 2012
- Mechanical properties of wood–fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional groupComposites Part A: Applied Science and Manufacturing, 2007
- Cellulose oxidative and hydrolytic degradation: In situ FTIR approachPolymer Degradation and Stability, 2005