Microstructure and Fatigue Properties of TiAl with Unique Layered Microstructure Fabricated by Electron Beam Melting
- 26 December 2018
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 941, 1597-1602
Abstract
The effect of a unique layered microstructure consisting of duplex-like region and equiaxed γ grains (γ bands) on the fatigue properties of Ti-48Al-2Cr-2Nb alloy bars fabricated by electron beam melting (EBM) at an angle (θ) of 90° between the building direction and cylinder (loading) axis was investigated focusing on the layered microstructure and test temperature. We found the room temperature (RT) fatigue strength of the alloy bars fabricated at θ = 90° is higher than that of the bars fabricated at θ = 0°. Moreover, it is comparable to that of the cast alloys with hot isostatic pressing (HIP) treatment in low-cycle fatigue life region, even without HIP treatment. The high fatigue strength of the bars at RT is attributed to the γ band, which acts as a resistance for crack propagation directed perpendicular to the γ band. On the other hand, the fatigue strength of the bars at θ = 90° is lower than that of the bars at θ = 0° in low-cycle fatigue life region at 1023 K. This is because the γ bands dose not act as a resistance for crack propagation at 1023 K. Although the bars at θ = 90° exhibits low fatigue strength in the region at 1023 K, that value is comparable to that of HIP-treated cast alloys due to the fine grain size, which is one of the features for the alloys fabricated by the EBM.Keywords
This publication has 13 references indexed in Scilit:
- Effects of HIP on microstructural heterogeneity, defect distribution and mechanical properties of additively manufactured EBM Ti-48Al-2Cr-2NbJournal of Alloys and Compounds, 2017
- Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam meltingAdditive Manufacturing, 2017
- Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloyJournal of Materials Processing Technology, 2014
- Selective electron beam melting of Ti–48Al–2Nb–2Cr: Microstructure and aluminium lossIntermetallics, 2014
- Laser Cladding of TiAl Intermetallic Alloy on Ti6Al4V -Process Optimization and PropertiesPhysics Procedia, 2014
- Gamma Titanium Aluminide Alloys2011
- Investment casting technology for production of TiAl low pressure turbine blades – Process engineering and parameter analysisIntermetallics, 2011
- Freeform Fabrication of Titanium Aluminide via Electron Beam Melting Using Prealloyed and Blended PowdersResearch Letters in Materials Science, 2007
- Ordered intermetallic alloys, part III: Gamma titanium aluminidesJOM, 1994
- Recent Progress on Intermetallic Alloys for Advanced Aerospace Systems.ISIJ International, 1991