Evolution of water sorption in catalyst coated membranes subjected to combined chemical and mechanical degradation
- 27 April 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 17 (21) , 13872-13881
Abstract
Catalyst coated perfluorosulfonic acid ionomer membranes (CCMs) were subjected to a combined chemical/mechanical accelerated stress test (AST) designed for rapid benchmarking of in situ membrane stability in polymer electrolyte fuel cells. In order to understand the evolution of the ionomer water sorption characteristics during combined chemical/mechanical degradation, CCM samples were periodically extracted from the AST and analyzed for ionomer mass fraction and water sorption properties. In spite of severe fluoride release and membrane thinning, the water uptake per unit mass of the partially degraded CCMs was found to be essentially constant. The mass fraction of ionomer in the CCM samples determined from thermogravimetric analysis (TGA) showed significant material loss throughout the AST process due to ionomer degradation and fluoride release, up to roughly 50% at end-of-life. The effects proceeding at different stages of degradation were therefore more accurately revealed by ionomer mass-normalized data. The water uptake per unit gram of ionomer was shown to increase significantly with degradation, in contrast to the previous results normalized by CCM dry mass. Although increased water sorption may indicate enlarged solvated hydrophilic domains in the membrane, which would be beneficial for enhanced proton mobility, the proton conductivity was found to decrease. This finding suggests that the additional water sorbed in the membrane was not contributing to proton conduction and was therefore likely situated in non-ionic cavities formed through degradation rather than in the ionic clusters.Keywords
This publication has 39 references indexed in Scilit:
- Effect of SiO2 additives on the PEM fuel cell electrode performanceInternational Journal of Hydrogen Energy, 2011
- Effect of Interfacial Water Transport Resistance on Coupled Proton and Water Transport Across NafionThe Journal of Physical Chemistry B, 2011
- Interfacial Water Transport Effects in Proton-Exchange MembranesJournal of Fuel Cell Science and Technology, 2010
- Transport properties of composite membranes containing silicon dioxide and Nafion®Journal of Membrane Science, 2008
- Water sorption, desorption and transport in Nafion membranesJournal of Membrane Science, 2007
- Function and Characterization of Metal Oxide−Nafion Composite Membranes for Elevated-Temperature H2/O2 PEM Fuel CellsChemistry of Materials, 2006
- Novel gas diffusion layer with water management function for PEMFCJournal of Power Sources, 2004
- Improvement of water management by a microporous sublayer for PEM fuel cellsJournal of Power Sources, 2002
- Ionic Conductivity of an Extruded Nafion 1100 EW Series of MembranesJournal of the Electrochemical Society, 2002
- Water Uptake by and Transport Through Nafion® 117 MembranesJournal of the Electrochemical Society, 1993