Primary Crystal Orientation of the Thin-Walled Area of Single-Crystalline Turbine Blade Airfoils
Open Access
Abstract
The thin-walled airfoil areas of as-cast single-crystalline turbine blades made of CMSX-4 superalloy were studied. The blades were produced by the industrial Bridgman technique at withdrawal rates of 2, 3 and 4 mm/min. The angle between the [001] crystallographic direction and blade axis, related to the primary orientation, was defined by the Ω-scan X-ray diffraction method at points on the camber line located near the tip of an airfoil and at points of a line located in parallel and near the trailing edge. Additionally, primary crystal orientation was determined by Laue diffraction at the selected points of an airfoil. The influence of mould wall inclination on the primary crystal orientation of the thin-walled areas is discussed. The effect of change in the [001] crystallographic direction, named as “force directing”, was considered with regard to the arrangement of primary dendrite arms in relation to the trailing edge and the camber line. It was stated that when the distance between the mould walls is less than the critical value of about 1.5 mm the “force directing” increases as the distance between the walls of the mould decreases. The effect may be controlled by selecting an appropriate secondary orientation using a seed crystal in the blade production process. The model of dendrite interaction with the mould walls, including bending and “deflection”, was proposed.Keywords
This publication has 26 references indexed in Scilit:
- Influence of Secondary Dendrite Orientation on the Evolution of Misorientation in the Platform Region of Single Crystal Superalloy Turbine BladesAdvanced Engineering Materials, 2018
- Three-Dimensional Dendrite Growth Within the Shrouds of Single Crystal Blades of a Nickel-Based SuperalloyMetallurgical and Materials Transactions A, 2017
- Subgrain boundaries in single crystal blade airfoil of aircraft engineCrystal Research and Technology, 2017
- Misorientation induced by withdrawal rate transition and its effect on intermediate temperature stress rupture properties of a Ni3Al based single crystal superalloyJournal of Alloys and Compounds, 2015
- Effect of withdrawal rate on microstructure and lattice misfit of a Ni3Al based single crystal superalloyJournal of Alloys and Compounds, 2014
- Microstructure and grain orientation evolution of a specially shaped shroud during directional solidification processProgress in Natural Science: Materials International, 2013
- Formation of stray grains during directional solidification of a nickel-based superalloyScripta Materialia, 2011
- Grain structure and texture evolutions during single crystal casting of the Ni-base superalloy CMSX-4Metals and Materials International, 2009
- Stray grain formation in the seed region of single-crystal turbine bladesJOM, 2005
- Factors determining crystal orientation of dendritic growth during solidificationMaterials Chemistry and Physics, 1997