Effect of Alumina Nano-Particles on Physical and Mechanical Properties of Medium Density Fiberboard
Open Access
- 22 September 2020
- Vol. 13 (18) , 4207
Abstract
This research aims to explore the effects of nanoparticles such as alumina (Al2O3) on the physical and mechanical properties of medium density fiberboards (MDF). The nanoparticles are added in urea-formaldehyde (UF) resin with different concentration levels e.g., 1.5%, 3%, and 4.5% by weight. A combination of forest fibers such as Populus Deltuidess (Poplar) and Euamericana (Ghaz) are used as a composite reinforcement due to their exceptional abrasion confrontation as well as their affordability and economic value with Al2O3-UF as a matrix or nanofillers for making the desired nanocomposite specimens. Thermo-gravimetric analysis (TGA) and thermal analytical analysis (TAA) in the form of differential scanning calorimetry (DSC) are carried out and it has been found that increasing the percentage of alumina nanoparticles leads to an increase in the total heat content. The mechanical properties such as internal bonding (IB), modulus of elasticity (MOE) and modulus of rupture (MOR), and physical properties such as density, water absorption (WA), and thickness swelling (TS) of the specimens have been investigated. The experimental results showed that properties of the new Nano-MDF are higher when compared to the normal samples. The results also showed that increasing the concentration of alumina nanoparticles in the urea-formaldehyde resin effects the mechanical properties of panels considerably.Keywords
Funding Information
- Prince Sattam bin Abdulaziz University (2020/01/16810)
This publication has 29 references indexed in Scilit:
- Mass transfer in medium density fiberboard (MDF) modified by NA+ montmorillonite (NA+MMT) nanoclayMaderas. Ciencia y Tecnología, 2014
- Performance of refractory aluminosilicate particle/fiber-reinforced geopolymer compositesComposites Part B: Engineering, 2012
- Thermo-Chemical Evaluation of Wood Plastic NanocompositeAdvanced Materials Research, 2012
- Bending strength and modulus of elasticity of wood-based panels at cold and moderate temperaturesCold Regions Science and Technology, 2010
- Effect of aluminum oxide nanoparticles on the properties of urea-formaldehyde resinRussian Journal of Applied Chemistry, 2006
- Structural and mechanical properties of polymer nanocompositesMaterials Science and Engineering: R: Reports, 2006
- Fracture toughness of geopolymeric concretes reinforced with basalt fibersCement and Concrete Composites, 2005
- Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialateMaterials Research Bulletin, 2003
- Flammability of polystyrene layered silicate (clay) nanocomposites: Carbonaceous char formationFire and Materials, 2002
- Urea–formaldehyde (UF) adhesive resins for woodInternational Journal of Adhesion and Adhesives, 1998