The comprehensive effect of surface texture and roughness under hydrodynamic and mixed lubrication conditions
Authors:
- 8 February 2017
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 231 (10) , 1307-1319
Abstract
A theoretical study is carried out to investigate the comprehensive effect of the machined roughness and fabricated textures, by solving the average Reynolds equation coupled with a mass-conservative cavitation algorithm and taking into account asperity contact. We analyzed the influence of surface roughness, which is represented by the combined root-mean-square roughness σ and surface pattern parameter γ on the optimum texture parameters including the dimple depth-over-diameter ratio and area density under hydrodynamic and mixed lubrication conditions. The results show that the effect of surface roughness on load-carrying capacity can be ignored under hydrodynamic lubrication condition. Furthermore, the optimum texture parameters under hydrodynamic lubrication condition and the optimum dimple depth-over-diameter ratio under mixed lubrication condition are determined at minimized friction coefficient, which can be taken as the same for smooth-textured surface and rough-textured surface. The corresponding minimum friction coefficient increases with increasing σ and γ, and decreasing dimple area density under mixed lubrication condition.Keywords
This publication has 15 references indexed in Scilit:
- Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findingsTribology International, 2016
- An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical sealsMeccanica, 2015
- A mass-conservative average flow model based on finite element method for complex textured surfacesScience China Physics, Mechanics & Astronomy, 2013
- Numerical analysis of a surface-textured mechanical seal operating in mixed lubrication regimeTribology International, 2012
- Research on Tribological Performance of Cylinder Liner by Micro-Laser Surface TexturingAdvanced Science Letters, 2011
- Performance Analysis of Full-Film Textured Surfaces With Consideration of Roughness EffectsJournal of Tribology, 2011
- Model-based virtual surface texturing for concentrated conformal-contact lubricationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2010
- Study on effect of dimples on friction of parallel surfaces under different sliding conditionsApplied Surface Science, 2010
- The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contactTribology International, 2005
- An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic LubricationJournal of Lubrication Technology, 1978