A novel test rig for the dynamic characterization of large size tilting pad journal bearings
Authors:
Open Access
- 1 September 2016
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 744 (1) , 012159
Abstract
The present work concerns the realization of a test bench for the dynamic characterization of high performance tilting pad journal bearings, within a collaboration between the Department of Civil and Industrial Engineering of Pisa, GE Oil&Gas and AM Testing. The objective is to cover journal diameters of interest of GE, from 150 to 300 mm, with peripheral speeds up to 150 m/s, static load up to 270 kN, dynamic loads up to 30 kN and frequencies up to 350 Hz, performances that make the apparatus very competitive worldwide. The adopted configuration has the test article (TA) floating at the mid-span of a rotor supported by two rolling bearings. The TA is statically loaded by a hydraulic actuator and excited dynamically by two orthogonal hydraulic actuators. Construction was recently concluded and preliminary tests are under way. In order to assess in advance the possible accuracy of the tests, a dynamic lumped parameter model of the test bench was developed to perform virtual experiments, including several possible sources of experimental errors and uncertainties. The model was implemented using reduced stiffness and mass matrices obtained from Finite Element Analysis by Component Modal Synthesis.Keywords
This publication has 10 references indexed in Scilit:
- A novel test rig for the dynamic characterization of large size tilting pad journal bearingsJournal of Physics: Conference Series, 2016
- A Review of Tilting Pad Bearing TheoryInternational Journal of Rotating Machinery, 2011
- Identification and Prediction of Force Coefficients in a Five-Pad and Four-Pad Tilting Pad Bearing for Load-on-Pad and Load-Between-Pad ConfigurationsJournal of Engineering for Gas Turbines and Power, 2011
- Comparison of power loss and pad temperature for leading edge groove tilting pad journal bearings and conventional tilting pad journal bearingsTribology International, 2010
- Identification Methods and Test Results for Tilting Pad and Fixed Geometry Journal Bearing Dynamic Coefficients – A ReviewShock and Vibration, 2009
- An Experimental Study of Static and Dynamic Characteristics of a 580mm(22.8in.) Diameter Direct Lubrication Tilting Pad Journal BearingJournal of Tribology, 2005
- Measured Performance of Tilting-Pad Journal Bearings over a Range of Preloads—Part II: Dynamic Operating ConditionsTribology Transactions, 2004
- Measured Performance of Tilting-Pad Journal Bearings over a Range of Preloads—Part I: Static Operating ConditionsTribology Transactions, 2004
- Excitation Frequency Effects on the Stiffness and Damping Coefficients of a Five-Pad Tilting Pad Journal BearingJournal of Tribology, 1999
- A Test Apparatus and Facility to Identify the Rotordynamic Coefficients of High-Speed Hydrostatic BearingsJournal of Tribology, 1994