Effect of Varying Stiffness and Functionalization on the Interfacial Failure Behavior of Isotactic Polypropylene on Hydroxylated γ-Al2O3 by MD Simulation
Open Access
- 20 January 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (4) , 6133-6141
Abstract
This study focuses on polymer-metal joints consisting of isotactic polypropylene (iPP) or iPP grafted with maleic anhydride (iPP-g-MA) and hydroxylated γ-Al2O3, which is a model for an oxidized aluminum surface, and investigates the contributions of the Young's moduli of iPP and iPP-g-MA and chemical functionality (MA groups) in iPP-g-MA to the interfacial failure behaviors using the molecular dynamics (MD) simulation method. First, our calculations demonstrated that the tensile strength observed in interfacial failures of the joints increases as Young's modulus of the polymer in the joints increases. This is because a higher stiffness makes it harder for a void to form within the polymer matrix under the applied tensile strain and to reach the interface. Second, in iPP-g-MA-γ-Al2O3 joints, MA groups work more effectively to improve the interfacial strength as the Young's modulus of the polymer in the joints increases. For iPP-g-MA with a lower Young's modulus, the polymer molecules are pulled off the surface in a peel mode with increasing normal strain due to their greater flexibility. This results in a gradual removal of the MA groups and thus reduces their contribution. Meanwhile, for a higher Young's modulus, iPP-g-MA molecules at the interface are removed in a tensile mode because of their increased stiffness. This leads to more MA groups required to be detached from the surface at the same time to cause interfacial failure, thus increasing the contributions of the MA groups.Keywords
This publication has 48 references indexed in Scilit:
- Mechanochromic systems for the detection of stress, strain and deformation in polymeric materialsJournal of Materials Chemistry, 2011
- Adhesion of polymersProgress in Polymer Science, 2009
- Mechanism of adhesion promotion between aluminium sheet and polypropylene with maleic anhydride‐grafted polypropylene by γ‐aminopropyltriethoxy silaneSurface and Interface Analysis, 2008
- Influence of grafted polypropylene on the mechanical properties of mineral‐filled polypropylene compositesJournal of Applied Polymer Science, 2006
- Relationship between the structure and mechanical properties of polypropylene: Effects of the molecular weight and shear‐induced structureJournal of Applied Polymer Science, 2006
- Synthesis, Characterization and Properties of (Vinyl Triethoxy Silane‐grafted PP)/Silica NanocompositesMacromolecular Symposia, 2006
- First-principles simulation: ideas, illustrations and the CASTEP codeJournal of Physics: Condensed Matter, 2002
- Ab initio characterizations of molecular structures, conformation energies, and hydrogen-bonding properties for polyurethane hard segmentsMacromolecules, 1993
- Special points for Brillouin-zone integrationsPhysical Review B, 1976
- Density, crystallinity, and heptane insolubility in isotactic polypropyleneJournal of Applied Polymer Science, 1959