Analysis of Quantification and Mechanism of SBS Modifier in SBS-Modified Asphalt
Authors:
- 1 July 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 33 (7) , 04021158
Abstract
The determination of styrene-butadiene-styrene (SBS) content in SBS-modified asphalt (SBSMA) is crucial in road quality control. In this study, a polystyrene (PS)-based index, which is an alternative indicator for the current polybutadiene (PB)-based index of SBS content determination in specification based on the Fourier transform infrared spectroscopy test, was proposed to provide a more accurate measurement. The influences of the types of base asphalt/SBS modifiers/solvents, sulfur stabilizers, and aging on SBS content determination were investigated based on both of the two indices. The results show that the PS-based index has higher accuracy and is recommended as the indicator in the content determination. The selections of the types of the base asphalt/SBS when preparing the calibration samples should correspond to those of the testing samples to avoid the measurement deviation. Trichloroethylene solvent has an interference influence on the characteristic peak of PB in SBSMA. The sulfur and aging both have a double-sided effect on the SBS content determination. Furthermore, the fluorescence microscopy test and the four-component test were conducted to correlate the compatibility of asphalt with SBS and the stability of the asphalt colloidal structure. The gel permeation chromatography test was also used to verify the influence of aging on the SBS content determination.Keywords
This publication has 26 references indexed in Scilit:
- Aging Behaviour and Mechanism of SBS-Modified AsphaltJournal of Testing and Evaluation, 2012
- Quantification of SBS Content in SBS Polymer Modified Asphalt by FTIRAdvanced Materials Research, 2011
- Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumenConstruction and Building Materials, 2009
- Ageing by UV radiation of an elastomer modified bitumenFuel, 2008
- An FTIR standard addition method for quantification of bound styrene in its copolymersPolymer Testing, 2008
- Thermal degradation of polystyreneJournal of Analytical and Applied Pyrolysis, 2001
- Chemical and rheological evaluation of ageing properties of SBS polymer modified bitumensFuel, 1998
- Quantitative Analysis of Polymers and Crumb Rubber in Hot-Mix AsphaltsTransportation Research Record: Journal of the Transportation Research Board, 1997
- The Determination of SBS, EVA and APP Polymers in Modified Bitumens1992
- Applied Infrared Spectroscopy in the Rubber IndustryRubber Chemistry and Technology, 1972