Effect of the simultaneous Ti and W addition on the microstructure and wear behavior of a high chromium white cast iron
Authors:
- Francisco Vapeani GuerraFGFrancisco Vapeani Guerra
- Arnoldo Bedolla-JacuindeABArnoldo Bedolla-Jacuinde
- Jorge Zuno-SilvaJZJorge Zuno-Silva
- Ignacio MejiaIMIgnacio Mejia
- Edgar Cardoso-LegorretaECEdgar Cardoso-Legorreta
- Alberto Arenas-FloresAAAlberto Arenas-Flores
- 26 August 2019
- journal article
- research article
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 116 (6) , 602
Abstract
The present work analyzes the effect of 0.7%Ti and 1.7%W addition to a 17% chromium white iron in as-cast condition and after destabilization heat treatment. These alloys are commonly used in applications where a high abrasive wear resistance is required. For this reason, in addition to the characterization, a complementary wear test was performed. The alloys were characterized by optical and electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. The simultaneous Ti and W addition promoted the (Ti,W)C primary carbides formation which grow in the early stages of solidification. These carbides were found well distributed in the iron matrix with an average hardness value of 2450 HV. Moreover, tungsten was found partially distributed in the different phases increasing the microhardness by solid solution and refining the eutectic carbide. These microstructural modifications resulted in the increase of the bulk hardness and abrasive wear resistance of the alloyed iron. After destabilization heat treatment, the carbide precipitation and the matrix transformation produced a secondary hardening reducing the wear losses. Based in the results of the present study, the simultaneous addition of these elements to promote the (Ti,W)C carbide formation during solidification represents an effective method to increase the hardness and wear resistance of these kind of alloys via small additions.Keywords
This publication has 23 references indexed in Scilit:
- Effect of tungsten on microstructure and properties of high chromium cast ironMaterials & Design (1980-2015), 2012
- Solidification of High Chromium White Cast Iron Alloyed with VanadiumMATERIALS TRANSACTIONS, 2011
- Ultra-High-Hardness (Ti, W)C Matrix Metal Ceramics Prepared through Combustion Synthesis under High GravityAdvanced Materials Research, 2010
- The abrasive wear resistance of TIC and (Ti,W)C-reinforced Fe–17Mn austenitic steel matrix compositesTribology International, 2010
- Microstructural and mechanical characterization of in situ TiC and (Ti,W)C-reinforced high manganese austenitic steel matrix compositesMaterials Science and Engineering: A, 2009
- Microstructure and abrasive wear study of (Ti,W)C-reinforced high-manganese austenitic steel matrix compositeMaterials Letters, 2008
- Effect of titanium and tungsten on the structure and properties of heat-abrasion resistant steelMaterials Science and Engineering: A, 2008
- Effects of tungsten on erosion–corrosion behavior of high chromium white cast ironMaterials Science and Engineering: A, 2007
- Effect of titanium on the as-cast microstructure of a 16%chromium white ironMaterials Science and Engineering: A, 2005
- X-ray method of measuring retained austenite in heat treated white cast ironsJournal of Heat Treating, 1979